747189
7
Zoom out
Zoom in
Previous page
1/52
Next page
Indicators and colour Description
Orange/red indicator
Battery
Indicator o: battery fully charged
Indicator lit orange: battery charging
Indicator blinking orange: battery being recharged
Indicator blinking red: battery low (and no mains power)
Green indicator
Power supply
Indicator lit: the instrument is supplied by a mains voltage
Indicator o: the instrument is supplied by the battery
Green indicator
(built into the connector)
USB
Indicator o: no activity
Indicator blinking: activity
Yellow indicator
(built into the connector)
Ethernet
Indicator o: the stack or the Ethernet controller is not initialized
Slow blinking (once per second): the stack is correctly initialized
Rapid blinking (10 times per second): the Ethernet controller is correctly initialized
Two rapid blinks followed by a pause: DHCP error
Indicator lit: network initialized and ready to be used
SD MEMORY CARD
The PEL accepts SD and SDHC cards, FAT32 formatted, up to a capacity of 32 GB.
The PEL is delivered with a formatted SD card. If you want to install another SD card:
Check that the new SD card is not locked.
Format the SD card using PEL Transfer (recommended) or using a PC.
Open the elastomer cap marked .
Press on the SD card in the instrument and withdraw it.
Do not withdraw the SD card if recording is in progress.
Insert the new card and push it home.
Put the elastomer cap back on to keep the instrument waterproof.
INSTALLING PEL TRANSFER
®
Do not connect the instrument to the PC until you have installed the software and the driver.
Insert the CD in your CD-ROM drive.
Go to the PEL_Transfer_software directory and start setup.exe.
Then follow the installation instructions.
Remark: For complete installation instructions, refer to the manual on the CD-ROM.
OPENING PEL TRANSFER
Connect the voltage inputs of the PEL to mains. The instrument is turned on.
Connect the PEL to the PC using the USB cable provided. Wait until the driver is fully installed before continuing.
Double-click on the PEL icon
on the desktop to open PEL Transfer.
Select the Add instrument icon in the toolbar or in the main Instrument menu.
Follow the instructions of the Add an instrument
wizard. If PEL Transfer does not detect the instrument in the
pull-down list, click on the Update button.
When the connection with the instrument is established, the name of the instrument should appear on the side left of
the window in the PEL Network branch of the tree.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chauvin Arnoux PEL102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chauvin Arnoux PEL102 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 10,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Chauvin Arnoux PEL102

Chauvin Arnoux PEL102 User Manual - English - 80 pages

Chauvin Arnoux PEL102 User Manual - German - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info