815482
7
Zoom out
Zoom in
Previous page
1/20
Next page
CLEANING AND MAINTENANCE
Cleaning
The appliance is finished in silicone paint or vitreous enamel. To clean
the surfaces simply wipe over with a dry cloth. Abrasive pads and
scouring cleaners must not be used as these will damage the finish.
Care should be taken not to knock the enamel with hard objects as it
will chip.
Cleaning the Glass CHIMNEY SWEEPING
The glass in the doors is a special ceramic glass which is able to
withstand high temperatures. Before cleaning the glass open the
doors and allow them to cool. Clean the glass using a damp cloth and
then wiping over with a dry cloth. Any stubborn deposits on the glass
may be removed with a proprietary stove glass cleaner or ceramic
hob cleaner. Some deposits on the glass may be burnt off simply by If the appliance is in continuous use, the chimney should be swept at
running the fire at a fast rate for a few minutes. Do not use abrasive least twice a year. In most installations it will be possible to sweep the
cleaners or pads as these can scratch the surface which will weaken chimney through the appliance.
the glass and cause premature failure. Aerosol spray cleaners should
First remove the front firebars and the throat plate. Then sweep the
not be used near the appliance whilst it is under fire.
chimney ensuring that soot is removed from all horizontal surfaces
When not in use after sweeping.
If the fire is going to be out of use for a long period (for instance in In situations where it is not possible to sweep through the appliance
the summer), then to prevent condensation, and hence corrosion, the installer will have provided alternative means, such as a soot
the thermostat should be left at the maximum setting and the main door. After sweeping the chimney the appliance flue outlet and the
doors left ajar. It is also advisable to sweep the chimney and clean out flue pipe connecting the appliance must be cleaned with a flue brush.
the fire. Spraying the inside of the doors and firebox with a light oil,
After cleaning any soot from within the fire, replace the throat plate
such as WD40, will also help to keep all internal parts working well.
and the front firebars.
Door Seals
Different types of sweep’s brushes are available to suit different
For the fire to operate correctly it is important that the door seals flueways. For standard brick chimneys a wire centre sweep’s brush
are in good condition. Check that they do not become worn or fitted with a guide wheel is recommended. For prefabricated
frayed and replace them when necessary. insulated chimneys the manufacturers instructions with regard to
sweeping should be consulted.
Servicing
TROUBLE SHOOTING
Fire Will Not Burn
Check that:
a) the air inlet is not obstructed in any way,
b) chimneys and flueways are clear,
c) a suitable fuel is being used,
It is recommended that the fire is serviced once a year to keep it in
first class working order. After cleaning out the firebox thoroughly,
check that all internal parts are in good working order, replacing any
parts that are beginning to show signs of wear. Check that the door
seals are in good condition and that the door seals correctly. A
servicing guide is available on request. Repairs or modifications may
only be carried out by the Manufacturer or their approved agents.
Use only genuine Charnwood replacement parts
Where the chimney previously served an open fire, it is possible that
the higher flue gas temperature from a stove may loosen soot
deposits with the consequent risk of flue blockage. It is therefore
recommended that the chimney be swept a second time within a
month of regular use after installation.
It is recommended that the fire is serviced once a year to keep it in
first class working order. After cleaning out the firebox thoroughly,
check that all internal parts are in good working order, replacing any
parts that are beginning to show signs of wear. Check that the door
seals are in good condition and that the door seals correctly. A
servicing guide is available on request. Repairs or modifications may
only be carried out by the Manufacturer or their approved agents.
Use only genuine Charnwood replacement parts.
®
charnwood
OPERATING INSTRUCTIONS SLX20
MU LTI-FUEL
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Charnwood SLX20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Charnwood SLX20 in the language / languages: English as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info