815489
5
Zoom out
Zoom in
Previous page
1/18
Next page
avoid touching doors other than on the knobs as the metal will
become hot.
LIGHTING
Place some paper and dry kindling wood or fire lighters on the
grate and cover with a small amount of fuel. Turn the
thermostat control knob to the maximum setting and light the
paper or fire lighters. Close the doors and allow the fire to
burn until the fuel is well ignited then load with more fuel and
adjust the thermostat to the required level.
On initial lighting, the fire may smoke and give off an odour as
the silicon paint with which the firebox is painted reacts to the
heat. This is normal and will cease after a short time. In the
meantime the room should be kept well ventilated.
Before relighting the fire, riddle, remove any clinker from the
firebed and empty the ashpan.
CONTROLLING THE FIRE
The rate of burning, and hence the output, is controlled by the
control knob on the left hand side of the appliance, shown in
Fig. 1. This is linked to a thermostat which controls the boiler
temperature. The number at the top of the knob is the
number at which it is set. Some experimentation may be
necessary to obtain the desired heat output.
There is also a manual secondary air control which is located
above the door opening as shown in Fig. 2. To adjust the
setting, open the doors and use the door opening tool to
move the flap to the desired position. This control should be
in the closed position when burning any of the recommended
smokeless fuels except for anthracite and homefire which
should be burnt with the secondary air inlet open.
SYSTEM CONTROLS
The heating system controls may consist of time switches,
room thermostats, outdoor temperature thermostats and
thermostatic radiator valves in many different combinations.
These will work in conjunction with the thermostat control on
the appliance. The thermostat on the appliance will simply
control the temperature of the water coming from the boiler
and hence the temperature of the radiators and domestic hot
water. The automatic controls (other than thermostatic
radiator valves) will switch the pump (and hence the
radiators) on and off. Your installer will be able to explain the
controls fitted to your system and how to operate them.
ASH CLEARANCE
The ashpan should be emptied regularly before it becomes
too full. The most convenient time to remove the ash is just
before riddling the fire, since the ash will then be at its
coolest. Use the ashpan/riddling tool provided to remove the
5
®
OPERATING INSTRUCTIONS
Fig. 2. Secondary Air Control
Open
Secondary Air
Flap (shown
closed)
Use the door
opening tool to hold the carrying handle
a heat proof glove and/or
Use the ashpan/riddling tool
to support the front of the ashpan
Fig. 2a. Handling The Ashpan
charnwood
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Charnwood LA45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Charnwood LA45 in the language / languages: English as an attachment in your email.

The manual is 0.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info