Manual Charnwood ISLAND I - AP (page 13 of 24) (English)

815480

Zoom out

Zoom in

1/24

INSTALLATION INSTRUCTIONS

Horizontal lengths of flue must be kept to a minimum and should not

be more in length than the flue diameter.

The stove comes with the blanking plate (fig. 10) fitted to the top

flue outlet. The seal for the top outlet is a 155mm dia ring of rope

seal. The seal for the rear outlet is a length of adhesive backed

fibre webbing supplied with instructions ref: TIS093. This is applied

to the flue collar or the Vertical Rear Flue adapter for rear outlet

installations. For top outlet installations, the blanking plate must be

removed, have the webbing fitted to its sealing face, and fitted to

the rear flue outlet. Ensure that the fold on the clamping plate is

in line with the lugs on the firebox as shown in Fig 10. Ensure that

the clamping plate does not prevent the throat plate from seating

correctly. All flue connections must be well sealed.

Fig. 6 Vertical Register Plate With Bricked Up Fireplace

Fig. 7 Horizontal Register Plate With Rear Flue Connection

Fig. 8 Horizontal Register Plate With Top Flue Connection

Fig. 9 Horizontal Register Plate With Optional Vertical Rear Flue Connector

SOOT DOORS

It is possible to pass a 16 inch diameter sweeps brush through the

appliance but in most back outlet installations it will be necessary to

have a soot door to enable the chimney to be swept. The optional

vertical rear flue connector does allow the chimney to be swept

through the stove. Soot doors may either be in the actual brickwork

of the chimney or in the register plate. Various positions of soot

doors are shown in Figs. 6 to 9.

Alternative

Soot Door Positions

With Soot Door

Alternative

Soot Door Positions

146mm

With Soot Door

Soot Door

In Side or Rear

Of Chimney

Alternative

Soot Door Positions

With Soot Door

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Charnwood ISLAND I - AP in the language / languages: English as an attachment in your email.

The manual is 1.6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Charnwood ISLAND I - AP Manual

Product: