Manual Charnwood Country 6-8-12 (page 4 of 16) (English)

815484

Zoom out

Zoom in

1/16

RIDDLING GRATE

The riddling grate allows easier ash removal for high ash content fuel.

Wood may be burned on the grate although if only wood is burned

then it is better to remove the grate and burn the wood in a bed of

ash on the base of the stove.

To fit the grate you will need a 10mm spanner and a Phillips

screwdriver.

Before fitting the riddling grate remove the wood ash retainer. This is

not required when the riddling grate is fitted.

Undo the nut on the riddling blanking hole using a 10mm spanner.

Remove the cover and spacing washer (ensure you keep these in a

safe place as you will need to replace them if the riddling grate is

removed).

Place the back and side grate support plates into position (see Fig. 2).

Fix the riddler rod into position. There are two ways to do this:

A) Slide the riddler rod through the riddling hole, from the outside of

the stove body. Place one washer onto the rod before fitting through

the right hand support plate and the other washer onto the rod

before fitting through the left hand support plate. Slide the washers

into position either side of the right hand support plate and fasten the

“R” clips.

B) Remove the riddler knob from the riddling rod using a Phillips

screwdriver. Place one washer onto the rod before sliding the riddling

rod through the right hand support plate, fit the other washer onto

the rod before coming through the opening of the stove. Slide the

rod into the hole in the left hand support plate and then fit the “R”

Before lighting the stove check with the installer that the work and

checks described in the Installation Instructions have been carried out

correctly and that the chimney has been swept, is sound and free

from any obstructions.

This stove

is not suitable for use in a shared flue system. It is capable of

intermittent operation.

When using the stove in situations where

children, aged and/or infirm persons are present a fireguard must be

used to prevent accidental contact with the stove. The fireguard

should be manufactured in accordance with BS 8423:2010.

FUEL

This stove has been designated to burn wood. Only dry well

seasoned wood should be burnt on this appliance as burning wet

unseasoned wood will give rise to heavy tar deposits in the stove, on

the glass and within the chimney. For the same reason hard woods

(such as Ash, Beech and Oak) are better than soft woods (such as

Pine and Spruce). Burning wet unseasoned wood will also result in

considerably reduced outputs. The wood should be cut and split and

then left to season in a well ventilated dry place for at least one year

but preferably two years before use.

PETROLEUM COKE IS NOT SUITABLE FOR USE ON

THIS APPLIANCE. ITS USE WILL INVALIDATE THE

GUARANTEE.

For advice on other fuels please contact Charnwood. Wood should

not be burnt in smoke controlled areas.

DOOR OPERATION

Using the tool turn the right-hand door knob anti-clockwise to open

and clockwise to close (see Fig. 1).

charnwood

OPERATING INSTRUCTIONS

Door Knob

Door Airslide Door Airslide

Closed Open Open Closed

Closed Open

Control

Airwash

To Open

Fig. 1. Stove Controls

Rear

Support

Fig. 2. Riddling Grate

Side

Supports

Grate Plates

Ashpan Riddler Rod

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Charnwood Country 6-8-12 in the language / languages: English as an attachment in your email.

The manual is 0.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Charnwood Country 6-8-12 Manual

Product: