815477
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
®
OPERATING INSTRUCTIONS
Throat plate
Side brick
Throat plate
Fig. 8 Throat plate position and lowering
Side View
Lowering the throat plate
Bracket
Push upwards
towards corner
and rotate down
1
2
THROAT PLATE AND
FLUEWAY CLEANING
CHIMNEY SWEEPING
It is important that the throat plate and all the stove flueways are kept
clean in order to prevent potentially dangerous fume emission. Check
by looking up into the firebox for signs of soot or fly-ash on the
throat plate and sides of the firebox. If there are signs of a build up of
soot or fly-ash then cleaning is necessary. Cleaning should occur at
least once a month and more frequently if required. Let the fire out
and ensure it is cold before carrying out these operations. If
necessary, wear your Charnwood gloves to prevent irritation from
soot deposits.
The throat plate consists of two firebrick panels which rest on the
central bracket and the two side bricks. To lower, push the brick up
towards the topmost corner of the stove, and lower down diagonally
(see Fig. 8). Any sooty deposits should then be swept from the plate
and into the fire.
Return the throat plates to their correct position by reversing the
above method, ensuring they slot onto the bracket and rest securely
on the side panels.
The chimney should be swept at least twice a year. It will generally be
possible to sweep the chimney through the appliance. If the stove is
fitted in place of an open fire, the chimney should be swept one
month after installation to clear any soot falls which may have
occurred due to the difference in combustion between the stove and
the open fire.
First remove the fuel retainer and the throat plate. Then sweep the
chimney ensuring that soot is removed from all horizontal surfaces
after sweeping.
In situations where it is not possible to sweep through the appliance
the installer will have provided alternative means, such as a soot door.
After sweeping the chimney the appliance flue outlet and the flue
pipe connecting the stove to the chimney must be cleaned with a flue
brush.
After clearing any soot from within the stove, replace the throat plate
(see Fig. 8) and the fuel retainer.
Different types of sweep’s brushes are available to suit different
flueways. For standard brick chimneys, a wire centre sweep’s brush
fitted with a guide wheel is recommended. For prefabricated
insulated chimneys the manufacturers instructions with regard to
sweeping should be consulted.
CO ALARM
Your installer should have fitted a CO alarm in the same room as the
appliance. If the alarm sounds unexpectedly, follow the instructions
given under “Fume Emission” overleaf.
charnwood
BAY
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Charnwood Bay 5 VL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Charnwood Bay 5 VL in the language / languages: English as an attachment in your email.

The manual is 3.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info