707656

Charlton Jenrick Fireline Woodtec 5 Manual

23
Zoom out
Zoom in
Previous page
1/28
Next page
22 Woodtec Freestanding Issue 01.1 05/17
8.5 Removing Rear Casing. 1.
Unscrew screws securing
rear casing to stove back.
2. Very carefully lever the
upper edges of the casing
out from under the top
plate of the stove and then
lift the casing up and off
the rear securing hooks.
The rear spigot outlet
blanking plate can now be
removed if required.
Replacement requires
springing the casing
inwards and sliding down
onto the retaining hooks.
8.6 Door Hinge Adjustment. Door alignment may be adjusted by opening the door
then slackening the door hinge securing screws and re-positioning the hinge to
suit. This will adjust the horizontal alignment. For front to back alignment shims
are provided to pack the hinges to the correct position either by removing the
factory fitted ones or adding more. Check the door seals with a paper strip all
around after any adjustment to prove they are still sealing correctly.
8.7 Smoke Control Air Limiter. If the stove is to be used to burn seasoned wood logs
in a Smoke Control Zone in the UK, the Smoke Control air limiter bracket must be
fitted. This bracket prevents the air control being completely closed when the
stove is used to burn wood. Gently lie the stove on its side or back. Remove the
air box from the base of the stove by removing the 4 x securing screws and lift
away. The air limiter bracket may then be fitted to the air control slider as shown
with the 1 x M6 screw provided. Check operation limits the movement to that
specified on the instruction sheet accompanying the air limiter.
Do not lean the stove forwards when moving it to access the base as it will
likely damage the air control lever.
… 23 …


Need help? Post your question in this forum.

Forumrules
1

Forum

charlton-jenrick-fireline-woodtec-5

Reset search

  • where will i locate the SERIAL No of my WOODTEC 5 wood burner for Warranty MANY THANKS Submitted on 17-5-2022 at 18:18

    Reply Report abuse

  • where will i find the SERIAL No on my WOODTEC 5 for the Warranty many thanks P. Loach Submitted on 17-5-2022 at 18:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Charlton Jenrick Fireline Woodtec 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Charlton Jenrick Fireline Woodtec 5 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info