555413
14
Zoom out
Zoom in
Previous page
1/22
Next page
1
2
4
3
7
LOC
K
L
I
G
H
T
5
LO
C
K
LIG
H
T
6
L
OCK
LIG
H
T
23
Program your Keyless Entry
(optional)
Activate the opener only when door is in
full view, free of obstruction and properly
adjusted. No one should enter or leave
garage while door is in motion. Do not
allow children to operate push button(s)
or remote(s). Do not allow children to play
near the door.
NOTE: Your new Keyless Entry must be
programmed to operate your garage door
opener.
Program the Receiver to Match Additional
Remote Control Code
Using the orange “LEARN” Button:
1. Press and release the orange “learn”
button (1) on opener. The learn indicator
light will glow steadily for 30 seconds.
2. Within 30 seconds, enter a four digit
personal identification number (PIN) of
your choice on the keypad (2), then press
and hold the ENTER button.
3. Release the button when the opener light
blinks (3). It has learned the code. If the
light bulb is not installed, two clicks will be
heard.
NOTE: This method requires two people if
the Keyless Entry is already mounted outside
the garage.
Using the Multi-Function Door Control:
4. Enter a four digit personal identification
number (PIN) of your choice on the
keypad, then press and hold ENTER.
5. While holding the ENTER button, press
and hold the LIGHT button on the
Multi-Function Door Control.
6. Continue holding the ENTER and LIGHT
buttons while you press the push bar on
the Multi-Function Door Control (all three
buttons are held).
7. Release buttons when the opener light
blinks. It has learned the code. If the light
bulb is not installed, two clicks will be
heard.
L
O
C
K
LI
GH
T
24
Using the Wall-Mounted Door Control
(optional)
THE MULTI-FUNCTION DOOR CONTROL
Press the push bar (1) to open or close the door. Press again
to stop the door.
Light feature
Press the Light button (2) to turn the opener light on or off. It
will not control the opener light when the door is in motion. If
you turn it on and then activate the opener, the light will
remain on for 2-1/2 minutes. Press again to turn it off sooner.
Lock feature
Designed to prevent operation of the door from hand-held
remote controls. However, the door will open and close from
the Door Control, the Outside Keylock and the Keyless Entry
Accessories.
To activate, press and hold the Lock button (3) for 2 seconds.
The push bar light will flash as long as the Lock feature is on.
To turn off, press and hold the Lock button again for
2 seconds.The push bar light will stop flashing. The Lock
feature will also turn off whenever the “LEARN” button on the
opener panel is activated.
14
1
2
3
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chamberlain ML750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain ML750 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Chamberlain ML750

Chamberlain ML750 User Manual - English, German, Dutch, French, Italian - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info