555438
16
Zoom out
Zoom in
Previous page
1/44
Next page
15
Installation
STEP 6 Install the light bulbs
To prevent possible OVERHEATING of the end panel or lightsocket:
Use ONLY A19 incandescent (100W maximum) or compactfluorescent (26W maximum) light
bulbs.
DO NOT use incandescent bulbs larger than 100W.
DO NOT use compactfluorescent light bulbs larger than 26W (100W) equivalent.
DO NOT use halogen bulbs.
DO NOT use shortneck or specialty lightbulbs.
1. Pull on the top sides ofthe light lens and rotate the light lens down.
2. Insertan A19 incandescent (100W maximum) or compactfluorescent (26W,100W equivalent)
lightbulb into the light socket.
3. Rotate the lens up to close.
NOTE: Do not use halogen, short neck, or specialty light bulbs as these may overheat the end panel or
light socket. Do not use LED bulbs as they may reduce the range or performance of your remote controls.
or
or
STEP 7 Attach the emergency release rope and handle
To prevent possible SERIOUS INJURY or DEATHfrom a falling garage door:
If possible, use emergencyrelease handle to disengage trolley ONLY when garage door is
CLOSED. Weak or broken springsor unbalanced door could result in an open door falling rapidly
and/or unexpectedly.
NEVER use emergency release handle unless garage doorway isclear of persons and
obstructions.
NEVER use handle to pull door open or closed. Ifrope knot becomes untied, you could fall.
1. Insertone end of the emergencyrelease rope through the handle.Make sure that “NOTICE” is
rightside up. Tie a knot atleast1 inch (2.5 cm) from the end ofthe emergencyrelease rope.
2. Insertthe other end ofthe emergencyrelease rope through the hole in the trolleyrelease arm.
Mount the emergency release within reach,but atleast6 feet (1.83 m) above floor, avoiding
contact with vehicles to prevent accidental release and secure with a knot.
NOTE: If it is necessary to cut the emergency release rope, seal the cut end with a match or lighter to
prevent unraveling. Ensure the emergency release rope and handle are above the top of all vehicles to
avoid entanglement.
NOTICE
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chamberlain HD420EV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain HD420EV in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info