555434
39
Zoom out
Zoom in
Previous page
1/48
Next page
38
Operation
Using the Smart Control Panel (continued)
Light Feature
The lightswill turn on when someone enters through the open garage door and the safety reversing
sensor infrared beam is broken.If using the garage door opener lightas a work light,turn the light on
using the light button on the wall control or the light will turn off if you are beyond the range ofthe sensor.
LOCK
The LOCK feature isdesigned to prevent activation ofthe garage door opener from remote controls
while still allowing activation from the door control and keyless entry.Thisfeature isuseful for added
peace of mind when the home isempty (i.e.vacation).
When the Lockfeature ison, your remote controlshave been disabled and a message will display on the
door control (Figure 1).
TIMER-TO-CLOSE (TTC)
DO NOT enable TTC if operating a one-piece door. TTCcan be set to automaticallyclose your garage
door from the fully open position after a specified period of time (1, 5,10 minute intervals or a custom
setting up to 99 minutes).The screen on the door control can display the status of the TTC.Once the TTC
has been set and the door isopen,the selected close interval will be displayed on the screen and toggle
between the time and TTCmessage. When the TTC ison, a message will displayon the door control
screen (Figure 2).
To temporarily suspend the TTC feature pressand release the HOLD button.Press REL button to
resume normal TTC operation (Figure 3).
BATTERY BACKUP
If your garage door opener has a battery backup one oftwo messages will display on the door control if
there isa problem with the battery (Figures 4 and 5).
Figure 2 Figure 3
Figure 1
Figure 4
Figure 5
SMART CONTROL PANEL MENU
The features on the door control can be programmed through a series ofmenus on the screen and the
navigation buttons.
Navigation Buttons
Screen
Use the navigation buttons to make selections and program features.
The screen will display the time, temperature, and
current battery charge (if applicable) until the menu
button is pressed, and then it will display the menu
options. If there is a problem with the garage door
opener the screen will display the Diagnostic Code.
FEATURES MENU
Press the navigation button below MENU to viewthe Features menu.
Set the time, choose 12 or 24 hour clock and show/hide clock.
Set the Timer-to-Close feature off/on and set the time interval
before door closes.
Enable/disable lock.
Add remote controls, MyQ
®
devices, an extra remote button
to control your garage door opener lights, or a keyless entry.
SETTINGS MENU
Press the navigation button below the down arrow till you see TEMPERATURE to view the Settings
menu.
Display the temperature in Fahrenheit or Celsius and
show/hide the temperature.
Select a language.
Set duration for garage door opener light to stay on after
operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the
Motion sensor off/on, and turn the entry light feature off/on.
Adjust the contrast of the screen.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chamberlain 349544 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain 349544 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info