Manual Chacon 34949 (page 2 of 28) (English, Dutch, French, Portuguese, Spanish)

664851

Zoom out

Zoom in

1/28

Pet Immune PIR Motion Sensor

The Motion Sensor is designed for use on interior walls and is set to Home Mode

by default. Whenever the Sensor detects movement (while the alarm is armed) you

triggered and the Control Panel Internal Siren will sound immediately.

LED flashes once

when movement

is detected

Tamper Switch

The Tamper Switch (a black button with a silver spring at the top, located inside this

Sensor) is used to indicate an unauthorized attempt to remove its cover.

Whenever this button is released, it will trigger an alarm and the push alert will

notify you which Sensor has been triggered on tamper.

Low Battery Indication

If the LED indicator blinks once per 3 second, the battery must be replaced.

Working Mode

Test Mode

The Sensor enters a 1 minute settling down period on power up, thereafter entering

into Test Mode. In Test Mode, the Sensor detects movement every 10 seconds and

emits an alarm signal every time movement is detected. Test Mode will remain

active for 3 minutes, thereafter entering into Power Saving Mode.

Note: You may also enter Test Mode by pressing the Test Button at the back of the Sensor.

Power Saving Mode

If the Sensor detects movement twice within 3 minutes the Sensor will automatically

enter into Sleep Mode and no movement will be detected. The Sensor will leave

Sleep Mode after a 3 minute period without any movement.

Sleep after detecting human movement twice.

Case 1:

Initial start and then arm.

3 minutes later

No human movement within 3 minutes

Switch from sleep to arm.

Case 2:

Press the test button and then arm.

Pairing New Accessories to the Control Panel

There are two ways of pairing Accessories to the Control Panel – manually and via

App.

Manual Pairing

To pair Accessories manually please follow the instructions below:

Remote Control and Sensors:

1. Press the Learn button at the back of the Control Panel

2. Press any button on the Remote Control or trigger the Sensor

Very Important: Please note that pressing the Tamper Switch instead of triggering

the Sensor will register it as a 24 Hour Zone.

(Optional Accessory) Wireless Siren:

1. Press the Learn Button on the Siren

2. Arm the Control Panel via the App

Pairing from the App

To pair the Accessories via App, open the AW1 Alarm App, go to ‘Edit Accessories’

and follow the instructions on the screen.

WiFi Setup

Step One: Download the App

The App can be downloaded from the App Store or Google Play by searching for

“AW1 Alarm”.

Step Two: Power On

1. Remove the back cover from the Control Panel.

2. Connect the Power Adapter.

3. Set the Power Switch to “ON”.

4. Wait until the WiFi Indicator starts to blink (approx. 30 seconds)

Note: The Control Panel will emit a short ‘beep’ every 3 seconds when powered up. After 30

sta tus

Step Three: Connect the Control Panel to the Router

Important: AW1 does not support WiFi of 5GHz band, If dual-band(5GHz and

2.4GHz) router is used, make sure to connect with the 2.4GHz WiFi instead of the

5GHz's. Make sure your smartphone is connected to the local WiFi network and

then follow the steps in the App to connect the AW1 Control Panel to the Router.

1. Press and hold the [WiFi] Button inside the Control Panel for 3 seconds, the

Control Panel will emit one ‘beep’.

2. Tap [WiFi] in the [Settings] of your smartphone, and select the ‘WiFi Alarm’

network.

3. Return to the App and key in your WiFi name and password or open the drop

down menu to scan for all the nearby wireless networks.

4. The Control Panel will beep once, wait until the WiFi indicator and the Status

indicator stop blinking, indicating that the Control Panel has successfully connected

to the network.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chacon 34949 in the language / languages: English, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 38,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chacon 34949 Manual

Product: