Manual Cervelo S3 RIM - 2019 (page 55 of 196) (English, German, Dutch, French, Italian, Spanish)

780073

Zoom out

Zoom in

1/196

NOTE: This diagram is for assembly

reference only. During complete

assembly, hoses and control cables

will be present.

HEADSET ADJUSTMENT

1. Insert lightly greased M5 x 100mm preload screw

through the preload insert and thread into the fork

ramp hole on the drive side.

2. Tighten preload screw to remove any play in the

bearings.

100mm

Preload Screw

M5 x 100mm

Actual Size

NOTE: The preload

screw ships with

the ST029 stem.

FORK & STEM INSTALLATION - MECHANICAL

Note: It is recommended that you

familiarize yourself with the steering

system before complete installation,

by performing a trial assembly without

hoses or control cables present.

Cables must pass

through the preload

insert in the stem.

1. Install lightly greased bottom bearing onto fork.

2. Install lightly greased upper bearing into fame.

3. Install desired stem spacers followed by bearing

top cap, and compression ring with seal ring

onto the stem. Do not place a 2.5mm stem

spacer directly under the stem.

4. Install the fork into the stem steerer.

5. Apply light pressure to seat fork and stem, and

Install preload screw to lock the system. Tighten

to remove any play in the bearings (see page 20).

6. Starting at the mouth of the stem, feed shifter

housing, one at a time, through the stem, so that

it reaches from the shifter to the BB Cable Port.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo S3 RIM - 2019 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 44.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cervelo S3 RIM - 2019 Manual

Product: