Manual Cervelo S3 RIM - 2019 (page 44 of 196) (English, German, Dutch, French, Italian, Spanish)

780073

Zoom out

Zoom in

1/196

Locate shifter and brake housing ends at

shifters. Pull and/or push gently, so the hose

and housing travel through the system.

Trim the shifter housing at the leading edge

of the BB Cable Port and install cables as per

manufacturers instructions.

Straighten stem and  x into place by

tightening the Fork Clamp Wedge.

Install housing with ferrules into the BB

Cable Guide and route shifter cables

accordingly through the frame.

Connect the remaining controls and

complete assembly.

S3 ASSEMBLY OVERVIEW*

Install lightly greased upper headset bearing

into frame.

Place desired stem spacers, headset top cap,

seal ring and compression ring on stem steerer

for later installation.

With lightly greased bottom bearing in place,

install the fork into the frame and stem

steerer

Install the lightly greased M5 x 100mm

preload screw. Tighten to remove any play in

the bearings.

Starting at the stem mouth, slide enough

shifter housing through the stem steerer

system, so that it reaches from the shifter to

the BB Cable Port. Repeat this for 2nd shifter

housing, identifying which housing is front

and rear.

With shifters installed on bar, attach the bar

to the stem ensuring that shifter housings

are on the appropriate side of the faceplate.

NOTE: See the following pages for more detailed assembly instructions.

*Mechanical cabling shown

04 06

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo S3 RIM - 2019 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 44.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cervelo S3 RIM - 2019 Manual

Product: