780072
17
Zoom out
Zoom in
Previous page
1/32
Next page
16
ST029 STEM CUTTING INSTRUCTIONS
1. Use a light coloured grease pencil to accurately mark the cut-o location
on the stem steerer from 5mm to 25mm o the bottom edge. See table
on page 19 for the exact number based on the combination of frame size
and desired spacer stack.
2. Insert the ST029 in the Park Tool SG-6 Saw Guide (or equivalent) so that
the cut-o line can be seen clearly through the blade guide in the tool.
3. Using a blade designed speci cally for cutting metal; proceed with cutting
the stem steerer (as per Park Tool’s instructions).
4. Carefully  le the cut end removing any burrs, adding a radius to both the
inside and outside of the cut edge.
With 48cm and 51cm S3 frames, the stem steerer will need to
be cut to place the stem in the lowest stack position. Stems for
size 54cm to 61cm frames do not require cutting.
Max.25mm
Cut Line
The stem steerer must not bottom out/
contact the tapered portion of the fork
steerer. Damage to the fork or the brake
hose caused by the stem steerer could
result in a loss of control while riding and
potentially serious injury.
Ensure inside and outside of cut edge is
smooth and free of fork damaging burrs.
Damage to the fork or the brake hose
caused by the stem steerer could result
in a loss of control while riding
and potentially serious injury.
If the stem steerer is cut to achieve a lower
position, the minimum insert line on the
stem steerer must be moved up by the same
amount to ensure proper clamping.
100mm
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cervelo S3 Disc - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo S3 Disc - 2019 in the language / languages: English as an attachment in your email.

The manual is 4.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cervelo S3 Disc - 2019

Cervelo S3 Disc - 2019 User Manual - German - 32 pages

Cervelo S3 Disc - 2019 User Manual - Dutch - 32 pages

Cervelo S3 Disc - 2019 User Manual - French - 32 pages

Cervelo S3 Disc - 2019 User Manual - Italian - 32 pages

Cervelo S3 Disc - 2019 User Manual - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info