780082
4
Zoom out
Zoom in
Previous page
1/23
Next page
5 6
Clean chainstay with isopropyl
alcohol and apply chainstay
protector.
Lightly grease Rear Derailleur Hanger
Fixing Nut and install Rear Derailleur
Hanger (DRH-WMN112) nger tight. Final
tightening will be performed after rear
wheel installation.
Install Front Derailleur Mount
(FDM-0E0), and ensure xing
screws are torqued to 3Nm.
For 1x systems replace with
the Front Derailleur Mount
Blanking Plate (FDM-CVR).
Do not nal tighten rear derailleur hanger
assembly without rear wheel installed.
Doing so may result in a misaligned
derailleur and poor shifting.
FRAME & FORK PREPARATION
Hold the frame using a secured seatpost only.
Clamping the top tube can damage the frame
and void your warranty.
1. Apply carbon assembly compound to both
frame and seatpost.
2. Insert Seatpost Clamp (SPC-148A) in frame so
it is ush with the top tube.
3. Adjust height and torque to 8Nm maximum.
1. Lightly grease supplied M4 xing screw.
Install the Threaded Fork Insert (QRI-THD)
and xing screw, tightening only lightly.
2. Without wheel in place, install the axle
and tighten until the ange meets the fork
dropout face, but does not compress the
fork blades.
3. Tighten the xing screw to 3Nm.
4. Remove the axle and install wheel.
Reinstall axle and tighten to 12-15Nm.
5. Remove axle and wheel, and re-torque the
xing screw to 3Nm.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cervelo PX-Series - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo PX-Series - 2020 in the language / languages: English as an attachment in your email.

The manual is 10.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info