780067
14
Zoom out
Zoom in
Previous page
1/42
Next page
13
NOTE: This diagram is for assembly reference
only. During complete assembly, hoses and
control cables will be present.
Preload Fixing
Screw M6 x 30mm
Stem Preload Top
Cap(STC-HB11)
1" Upper Bearing
1 3/8" Lower
Bearing
Compression Ring
Basebar
(HB-HB11)
Basebar Clamping
Screw
Fork Clamping
Screw
Fork Rotation
Stop
Bearing Seal Ring
(afxed to Basebar)
1. Check the Basebar, and headset components to make sure
there are no sharp or rough edges on any of the surfaces
which could cut or damage the steerer tube. If any rough
edges are detected, have the components repaired (sharp
edges removed) or replaced before proceeding.
2. Press the lightly greased upper and lower headset bearings
into the frame, and insert the fork into the head tube.
3. Slide the compression ring onto the steerer, and down until it
fully seats in the top of the upper headset bearing. The split in
the compression ring must be oriented toward to left or right
side of the steerer – never towards the front or back.
4. Clean the seal seat of the Basebar with isopropyl alcohol, and
adhere the Seal Ring to the Basebar.
5. Slide the Basebar onto the fork steerer oriented as shown.
Note the Basebar must engage both the fork steerer and the
external steerer. Do not use grease on the fork steerer. The
use of Tacx Carbon Assembly Compound™or equivalent
friction paste is recommended to help secure the stem.
6. Lightly grease the threads of the Preload Fixing Screw.
FORK INSTALLATION
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cervelo P5 - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo P5 - 2019 in the language / languages: English as an attachment in your email.

The manual is 8.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cervelo P5 - 2019

Cervelo P5 - 2019 User Manual - German - 42 pages

Cervelo P5 - 2019 User Manual - Dutch - 42 pages

Cervelo P5 - 2019 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info