780066
20
Zoom out
Zoom in
Previous page
1/42
Next page
19
RISER POST CUTTING INSTRUCTIONS
1. Use a light coloured grease pencil to accurately mark the cut-o location
on the Riser Post. See table below for the exact number based on frame
size.
2. Insert the Riser Post in the Park Tool SG-7.2 Saw Guide (or equivalent) so
that the cut-o line can be seen clearly through the blade guide in the tool.
3. Using a blade designed specically for cutting carbon; proceed with
cutting the stem steerer (as per Park Tool’s instructions).
4. Carefully le the cut end removing any rough edges.
Achieving the lowest possible stack may require trimming
the Riser Post. If using a cut Riser Post ensure there is always
a minimum of 70mm inserted inside the frame.
Frame Size
Trim Amount for
Lowest Stack
(w/ riser plug)
S81mm
M61mm
L33mm
XL 3mm
Max. 81mm
Cut Line
If trimming is required, nal length should allow for a minimum
70mm of Riser Post remaining in the frame. Failure to meet
this requirement, may result in damage to the frame not
covered by warranty policy, or serious injury to rider.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cervelo P3X - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo P3X - 2019 in the language / languages: English as an attachment in your email.

The manual is 9.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cervelo P3X - 2019

Cervelo P3X - 2019 User Manual - German - 42 pages

Cervelo P3X - 2019 User Manual - Dutch - 42 pages

Cervelo P3X - 2019 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info