Manual Cervelo Multi-speed racing bicycles (page 20 of 40) (English)

658416

Zoom out

Zoom in

1/40

Cervélo Owner’s Manual

until it comes out of the rear dropouts.

d. Installing a Quick Release Rear Wheel

(1) Make sure that the rear derailleur is still in its outermost, high

gear, position

(2) Pull the derailleur body back with your right hand.

(3) Move the quick-release lever to the OPEN position (see fig. 6).

The lever should be on the side of the wheel opposite the

derailleur and freewheel sprockets.

(4) Put the chain on top of the smallest freewheel sprocket. Then,

insert the wheel up and back into the frame dropouts and pull

it all the way in to the dropouts.

(5) Tighten the quick-release adjusting nut until it is finger tight

against the frame dropout; then swing the lever toward the front

of the bike until it is parallel to the frame’s chainstay or seatstay and

is curved toward the wheel (fig. 7). To apply enough clamping

force, you should have to wrap your fingers around a frame tube

for leverage, and the lever should leave a clear imprint in the palm of

your hand.

WARNING: Securely clamping the wheel takes considerable

force. If you can fully close the quick release without wrapping

your fingers around the seatstay or chainstay for leverage, and

the lever does not leave a clear imprint in the palm of your

hand, the tension is insufficient. Open the lever; turn the

tension adjusting nut clockwise a quarter turn; then try again.

force. If you can fully close the quick release without wrapping

your fingers around the fork blade for leverage, and the lever

does not leave a clear imprint in the palm of your hand, the

tension is insufficient. Open the lever; turn the tension adjusting

nut clockwise a quarter turn; then try again.

(5) If the lever cannot be pushed all the way to a position parallel to the

fork blade, return the lever to the OPEN position. Then turn the tension

adjusting nut counterclockwise one-quarter turn and try tightening

the lever again.

(6) Re-engage the brake quick-release mechanism to restore correct

brake pad-to-rim clearance; spin the wheel to make sure that it is

centered in the frame and clears the brake pads; then squeeze the

brake lever and make sure that the brakes are operating correctly.

c. Removing a Quick Release Rear Wheel

(1) Shift the rear derailleur to high gear (the smallest, outermost

rear sprocket).

(2) If your bike has rim brakes, disengage the

brake’s quick-release mechanism to increase

the clearance between the wheel rim

and the brake pads (see Section 4.C, fig. 8 and

9).

(3) Pull the derailleur body back with your right hand.

(4) Move the quick-release lever to the OPEN position (fig. 6).

(5) Lift the rear wheel off the ground a few inches and, with the

derailleur still pulled back, push the wheel forward and down

fig. 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo Multi-speed racing bicycles in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cervelo Multi-speed racing bicycles Manual

Product: