780065
6
Zoom out
Zoom in
Previous page
1/20
Next page
1 1/8" Stem
Spacers (Total
Height 40mm)
Headset Bearing
Top Cap
1 1/8"
Compression Ring
Compression
Plug Assembly
with Top Cap
Upper Bearing
1 1/8",36°x45°
Lower Bearing
1 1/2",36°x45°
Note: See page 18 for more
information on fork insert
installation.
5
FORK PREPARATION Max.
4mm
A 2.5mm spacer under the
Stem Cap is advised
1st
Mark
2nd Mark
/Final Cut
1. Apply grease to the bearing seats, and Install
the upper & lower headset bearings into the
head tube.
2. Fit the fork provided with your frame into
the head tube with the complete headset,
required spacers, and the stem.
3. Tighten the Top Cap bolt to take slop out
of system and ensure the assembly is fully
seated (1-2Nm). Mark the steerer tube at the
top of the stem.
4. Remove fork and clearly mark the fork steerer
tube at a point 4mm below the rst mark.
Take care to verify that this measurement
is correct as this de nes the cut line for the
steerer tube.
5. Lightly grease supplied M4 xing screws,
and install the Fork Dual O set Axle Inserts to
the fork. Tighten to 3Nm.
Your Cervélo frame & fork have been designed
to work together. Do not substitute a di erent
size fork without  rst consulting Cervélo
Customer Service to con rm compatibility with
your frame.
Avoid breathing the dust created during cutting
carbon composite materials.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cervelo Aspero - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo Aspero - 2020 in the language / languages: English as an attachment in your email.

The manual is 2.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cervelo Aspero - 2020

Cervelo Aspero - 2020 User Manual - German - 20 pages

Cervelo Aspero - 2020 User Manual - Dutch - 20 pages

Cervelo Aspero - 2020 User Manual - French - 20 pages

Cervelo Aspero - 2020 User Manual - Italian - 20 pages

Cervelo Aspero - 2020 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info