Manual Cendo KR944F1TS - Serie 9 (page 40 of 44) (English, Dutch)

790677

Zoom out

Zoom in

1/44

CENDO – Handleiding Flex Inductie kookplaat KR944F1TS V1.0

ENGLSH

Spillovers on the

touch controls

1. Switch the power to the cooktop

off.

2. Soak up the spill

3. Wipe the touch control area with a

clean damp sponge or cloth.

4. Wipe the area completely dry

with a paper towel.

5. Switch the power to the cooktop

back on.

• The cooktop may beep and turn

itself off, and the touch controls

may not function while there is

liquid on them. Make sure you wipe

the touch control area dry before

turning the cooktop back on.

8.3 Hints and tips

Problem

Possible causes

What to do

The cooktop cannot

Be turned on.

No power.

Make sure the cooktop is

connected to the power supply and

that it is switched on.

Check whether there is a power

outage in your home or area. If

you’ve checked everything and the

problem persists, call a qualified

technician.

The touch controls are

unresponsive.

The controls are locked.

Unlock the controls. See section

‘Using your ceramic cooktop’ for

instructions.

The touch controls are

difficult to operate.

There may be a slight film of

water over the controls or you

may be using the tip of your

finger when touching the

controls.

Make sure the touch control area is

dry and use the ball of your finger

when touching the controls.

The glass is being

scratched.

Rough-edged cookware.

Unsuitable, abrasive scourer or

cleaning products being used.

Use cookware with flat and smooth

bases. See ‘Choosing the right

cookware’.

See ‘Care and cleaning’.

Some pans make

crackling or clicking

noises.

This may be caused by the

construction of your cookware

(layers of different metals

vibrating differently).

This is normal for cookware and

does not indicate a fault.

The induction hob makes

a low humming noise

when used on a high heat

setting.

This is caused by the technology

of induction cooking.

This is normal, but the noise should

quieten down or disappear

completely when you decrease the

heat setting.

Fan noise coming from

the induction hob.

A cooling fan built into your

induction hob has come on to

prevent the electronics from

overheating. It may continue to

run even after you’ve turned the

induction hob off.

This is normal and needs no action.

Do not switch the power to the

induction hob off at the wall while

the fan is running.

Pans do not become hot

and appears in the

display.

The induction hob cannot

detect the pan because it is not

suitable for induction cooking.

The induction hob cannot detect the

pan because it is too small for the

cooking zone or not properly

centered on it.

Use cookware suitable for

induction cooking. See section

‘Choosing the right cookware’.

Centre the pan and make sure that

its base matches the size of the

cooking zone.

The induction hob or a

cooking zone has turned

itself off unexpectedly, a

tone sounds and an error

code is displayed

(typically alternating with

one or two digits in the

cooking timer display).

Technical fault.

Please note down the error

letters and numbers, switch

the power to the induction hob

off at the wall, and contact a

qualified technician.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cendo KR944F1TS - Serie 9 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cendo KR944F1TS - Serie 9 Manual

Product: