542341
34
Zoom out
Zoom in
Previous page
1/144
Next page
34
During a telephone conversation, the playing of music is
not permitted.
As a call comes in on the second telephone, whilst a con-
versation is underway on the rst, you can press and release
the MFB button to interrupt the rst call and activate the
second.
• You cannot refuse a call coming in on the second telephone
whilst carrying out a conversation on the rst.
When listening to music, you can answer a telephone call
received. Press and release the MFB button to enable the
call. At the end of the call, music will automatically continue
playing from the exact point at which it had stopped.
• To adjust the volume, press the buttons Volume + or Volu-
me -, depending on the desired volume level.
N.B.: In telephones equipped with musical players, and therefore which
include a Stereo (A2DP) prole, the Telephone + Stereo (A2DP) function
coincides. As such, it may not be possible to connect a further Stereo
(A2DP) player.
3.11 Voice response (VOX )
The voice response function allows you to an-
swer a call without having to press any buttons.
Enabling voice response: Press and hold the
Volume + button for approximately 5 seconds.
An acoustic sound will advise you that this has been done.
Disabling voice response: Press and hold the Volume -
button for approximately 5 seconds. An acoustic sound will
advise you that this has been done.
To answer a call: When receiving a call, simply say a word
(e.g. ‘HELLO’) within ten seconds, to enable the line.
To refuse a call: When receiving a call, simply allow ten se-
conds to pass and it will be refused.
3.12 Voice call
The voice call function allows you to make a call
without using the telephone keys. INTERPHONE
F4 stereo is compatible with the voice call fun-
ction of various dierent mobile Bluetooth® telephones: to
enable it and access the controls, please refer to your tele-
phone instruction manual.
Please refer to the section Use - Telephone section.
4 BLUETOOTH® SPECIFICATIONS
Bluetooth®:
v2.1 EDR
Supported proles:
Headset – Handsfree – A2DP / AVRCP / SBC
Pairing:
up to 8 devices
Multipoint connection:
up to three devices
(e.g. 1 telephone + 1 intercom + 1 stereo (A2DP)
5 CARE AND MAINTENANCE
If not using the kit for long periods of time, the battery must
be charged every two/three months, to avoid damage.
Do not use solvents or de-greasers to clean the kit as these
can damage it. Clean with a damp sponge and neutral soap
if required.
N.B.: When cleaning, to avoid water ltering through the connector and
damaging the control panel, please ensure that you have placed the
battery charger plug into the socket. If mounted on the helmet, leave
the speaker connector connected. Kit waterproong is only guaranteed
when the connector is connected.
telecom
telecom
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cellular INTERPHONE F4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cellular INTERPHONE F4 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info