Manual Cellular INTERPHONE F4 (page 30 of 144) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

542341

Zoom out

Zoom in

1/144

NOTES ON POSITION

Although it can be mounted on either side of the helmet, IN-

TERPHONE F4 stereo has been designed to be xed on the

left: this allows the motorcyclist to give commands with his

left hand, keeping the right on the accelerator.

ASSEMBLY OF THE SLIDE SUPPORT WITH REMOVABLE CLIP (7)

Take the support and note the best place to fasten it to the

side of the helmet. Insert the rear part of the clip into the

helmet and couple the other part on the outside.

Insert the screws and tighten gently. Check position and

move the support if necessary, by sliding it along. Tighten

the screws with the screwdriver supplied.

N.B.: the support also includes an adaptor to oset any possible die-

rences in thicknesses that there can be between helmets.

Mount the adaptor between the two parts comprising the slide support,

using the longer screws supplied with the kit.

ASSEMBLY OF THE ADHESIVE SLIDE SUPPORT (8)

Take the adhesive support and look for the best side and pla-

ce to position it. Clean and de-grease the part of the helmet

where you are going to stick the support (do not use any de-

tergents that could damage the helmet’s nish). Remove the

protective lm from the bi-adhesive, and apply the support

to the helmet.

As the support will not be able to be moved once stuck

onto the helmet, take great care with its positioning, when

applying.

FIXING THE CONTROL PANEL (9)

After having assembled the support onto the helmet, take

the Bluetooth® control panel, and insert into the guide, from

top to bottom.

Check that the Bluetooth® control panel is correctly locked in

its casing by trying to remove it, pulling upwards.

The control panel must always be inserted from top to bot-

tom, regardless of whether the kit is positioned to the right

or left of the helmet. The connector for the speaker with mi-

crophone must always be beneath the Bluetooth® control

panel.

SPEAKER WITH MICROPHONE ASSEMBLY (10)

Take the piece of Velcro and apply to the inside of the helmet

with the bi-adhesive, positioning it at your ear.

N.B.: before positioning the Velcro, it is a good idea to try it out. Put the

helmet on and check the most suitable position for xing.

Apply the speaker with microphone to the Velcro you have

just installed in the helmet.

Connect the speaker with microphone connector to the so-

cket on the Bluetooth® control panel (the connector can only

be inserted in one position).

Any excess wire must be gathered up into the helmet, be-

neath the padding.

ONLY FOR INTERPHONE F4 FULL FACE (11): position the

microphone Velcro into the chin guard, at the level of the

mouth. Gather up any excess wire beneath the padding.

REMOVING THE BLUETOOTH® CONTROL PANEL FROM

THE HELMET

To remove the Bluetooth® control panel, press the locking

lever against the helmet shell and, keeping it pressed, allow

the Bluetooth® control panel to slide upwards.

1.3 Turning on / Turning o

TURNING ON

Press and hold the MFB button for approximately 3 seconds.

The speaker will sound an acoustic warning and the LEDs will

begin ashing quickly for around 3 seconds.

Subsequently, in stand-by mode, the LED will ash approxi-

mately once every 5 seconds.

TURNING OFF

Press and hold the MFB button. The speaker will sound a

prolonged acoustic warning and the LED will ash red prior

to turning o.

2 PAIRING

INTERPHONE F4 is a Bluetooth® device that is compatible

with TELEPHONE – INTERCOM – STEREO (A2DP) proles.

2.1 Telephone

Pairing

INTERPHONE F4 can be used with a mobile telephone.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cellular INTERPHONE F4 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cellular INTERPHONE F4 Manual

Product: