673071
5
Zoom out
Zoom in
Previous page
1/8
Next page
Airflow direction adjustment procedure
Adjusting up/down air flow direction
--(1)
."",..-(2)
/(3)
/(4)
Up/down direction can be adjusted by using the VANE CONTROL button on the remote controller. This button,
each time pressed, changes the mode in the following sequence:
!(5) @ (AUTO)
Change to the VANE CONTROL mode.
TO change the VANE CONTROL velocity press the FAN SPEED button.
Eachtimethebuttonis pressed,fanspeedis changedin sequence,from. [La]" [Mid] [Hi]@[AUTO].
To coolthe wholeroom ,usethe (HI)mode, (COOLMODE)
.If the soundof the air conditioneroperating
disturbsyour sleep,usethe SLEEPmode.
Recommended horizontal VANE range.
Use in the @ (AUTO)position usually.
Use positions -- (1) or / (2) in the
COOL or DRYmode and positions
/ (3) to !(5) in the HEAT mode
when adjusting to your requirements.
NOTE
81n the cooling operation ,when the air conditioner is operated with
VANECONTROLblowing down (4) or (5)for 1 hour, the VANECONTROL
direction is automatically set to level to prevent condensed water from
dropping.
8 Adjust the vertical VANE CONTROLdirection using the remote controller
.If the horizontal vane are moved manually, it may cause trouble.
81n heating operation, if the output air temperature is too low or when
defrosting is done ,the horizontal vane position is set to (1).
SWING ADJUSTMENT PROCEDURE
Press the SWING button
8 To release the SWING operation mode;
Press the SWINGbutton again
81f the SWING button is pressed during swing
~
Adjusting left/right air
flow direction
Adjust the direction by moving directly
the left fright air flow direction adjusting
fin by hand.
~~
\:1) ~
Note: When adjust the direction,stop
air conditioner.
PRESENTTIMESETTINGPROCEDURE
When cells are inserted, the present is automatically set to AM 12:00 EX:Set to AM 10:30
000
",'" ,",ca"", ,,"'
000
'"",,~,'","'0"'''
000
'"'''''' .00.".
3
Press the MIN button. (Set to 30)
4
Press the ClK botton again,then reattach
the back cover
NOTE The timer is set on the basis of the present time. So set the
present time correctly.
SLEEP OPERATION PROCEDURE
Usethismodeto reduceoperationsoundwhensleeping,etc.
:~
J
000
StEEP VANE CONTROL ~OOe
000
AUTOSTARTSWINGfA" sPeeO
000
AUTOSTOPHOUR ~\"
ON/OFF
A
..
o.
~
DP.." theSLEEPhutton I
To release the sleep mode;
Dp,"" theSLEEPb."on .g,'n. I
The air flow sound from the indoor unit is decreased.
When the SLEEP button is pressed during the SLEEP
mode, the SLEEP mode is released.
:No.te
Use the sleep mode when you are going to bed. If this mode
i! used in the day ,the capacity is reduced since the ambient
temperature is too high .(COOl MODE).
.,
nf
'" .,
$ (1)
II
(
J
In
LJ
1
Press the ClK button.
Unloadthebackcoverpushtheclockbottonwiththetip ofa
ball pen, etc. The time indicator is flickering and can set the
nresent time.
2
Press the HOUR button. (Set to AM 10:)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celiera L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celiera L in the language / languages: Dutch as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info