667016
38
Zoom out
Zoom in
Previous page
1/62
Next page
38
1. Find and center the desired target in the viewfinder of your camera.
2. Turn the focus knob until the image is as sharp as possible.
3. Place the black card over the front of the telescope.
4. Release the shutter using a cable release.
5. Wait for the vibration caused by releasing the shutter to diminish. Also, wait for a moment of good seeing.
6. Remove the black card from in front of the telescope for the duration of the exposure (see accompanying table).
7. Replace the black card over the front of the telescope.
8. Close the camera's shutter.
Advance the film and you are ready for your next exposure. Don't forget to take photos of varying duration and
keep accurate records of what you have done. Record the date, telescope, exposure duration, eyepiece, f/ratio, film,
and some comments on the seeing conditions.
The following table lists exposures for eyepiece projection with a 10mm eyepiece. All exposure times are listed in
seconds or fractions of a second.
Planet ISO 50 ISO 100 ISO 200 ISO 400
Moon
4 2 1 1/2
Mercury
16 8 4 2
Venus
1/2 1/4 1/8 1/15
Mars
16 8 4 2
Jupiter
8 4 2 1
Saturn
16 8 4 2
The exposure times listed here should be used as a starting point. Always make exposures that are longer and
shorter than the recommended time. Also, take a few photos at each shutter speed. This will ensure that you get a
good photo. It is not uncommon to go through an entire roll of 36 exposures and have only one good shot.
NOTE: Don't expect to record more detail than you can see visually in the eyepiece at the time you are
photographing.
Once you have mastered the technique, experiment with different films, different focal length eyepieces, and even
different filters.
L
L
o
o
n
n
g
g
E
E
x
x
p
p
o
o
s
s
u
u
r
r
e
e
P
P
r
r
i
i
m
m
e
e
F
F
o
o
c
c
u
u
s
s
P
P
h
h
o
o
t
t
o
o
g
g
r
r
a
a
p
p
h
h
y
y
This is the last form of celestial photography to be attempted after others have been mastered. It is intended
primarily for deep-sky objects, objects outside our solar system which includes star clusters, nebulae, and galaxies.
While it may seem that high magnification is required for these objects, just the opposite is true. Most of these
objects cover large angular areas and fit nicely into the prime focus field of your telescope. The brightness of these
objects, however, requires long exposure times and, as a result, is rather difficult.
There are several techniques for this type of photography, and the one chosen will determine the standard
accessories needed. The best method for long exposure deep sky astrophotography is with an off-axis guider when
you are using a Schmidt-Cassegrain. This device allows you to photograph and guide through the telescope
simultaneously. Celestron offers a very special and advanced off-axis guider, called the Radial Guider (# 94176).
In addition, you will need a T-Ring to attach your camera to the Radial Guider. With refractor and Newtonian
telescopes you can skip the comments about the Radial Guider but all else applies.
Other equipment needs include a guiding eyepiece. Unlike other forms of astrophotography which allows for fairly
loose guiding, prime focus requires meticulous guiding for long periods. To accomplish this you need a guiding
ocular with an illuminated reticle to monitor your guide star. For this purpose, Celestron offers the Micro Guide
Eyepiece (# 94171). Here is a brief summary of the technique:
Table 6-2
Recommended exposure time for photographing planets.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron Omni XLT 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron Omni XLT 150 in the language / languages: English as an attachment in your email.

The manual is 9,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info