667019
6
Zoom out
Zoom in
Previous page
1/47
Next page
6
The NexStar comes partially assembled and can be operational in a matter of minutes. The NexStar is
conveniently packaged in one reusable shipping carton that contains the following accessories:
25mm and 9mm Eyepieces – 1¼"
1¼" Star Diagonal
Star Pointer Finderscope and Mounting Bracket
Deluxe Accessory Tray
The Sky™ X Astronomy Software
NSOL Telescope Control Software
NexStar Hand Control w/ Object Database
A
A
s
s
s
s
e
e
m
m
b
b
l
l
i
i
n
n
g
g
t
t
h
h
e
e
N
N
e
e
x
x
S
S
t
t
a
a
r
r
Your NexStar comes in three major sections: the optical tube, the fork arm and the tripod. These sections can
be attached in seconds using the quick release coupling screw located under the tripod mounting platform and
the dovetail mounting clamp located on the inside of the fork arm. To begin, remove all of the accessories from
their individual boxes. Remember to save all of the containers so that they can be used to transport the
telescope. Before attaching the visual accessories, the telescope tube should be mounted to its tripod. First,
install the accessory tray onto the tripod legs:
1. Remove the tripod from the box and spread the legs
apart until the center leg brace is fully extended.
2. Locate the accessory tray, and place it on top of the
tripod center support brace in between the tripod legs
(see figure 2-1).
3. Rotate the accessory tray so that the central hole in the
tray slides over the flange post in the center of the
support bracket.
4. Finally, rotate the tray so that the locking tabs slide
under the locking clips on support bracket. You will
here the tray snap into place.
It is a good idea to level the tripod and adjust the height of the tripod legs before attaching the fork arm and
tube. Minor adjustments can be made later. To adjust the height of the tripod legs:
1. Loosen the tripod leg locking bolt located on the side of each leg.
2. Slide the inner portion of each leg down 6" to 8" inches.
3. Adjust the tripod height until the bubble level on the tripod leg is
centered.
4. Tighten the tripod locking bolts to hold each leg in place.
Figure 2-1
Flange Post
Locking Tabs
Locking
Clips
Bubble
Level
Figure 2-2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron NexStar SLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron NexStar SLT in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info