580478

Celestron NexStar 5SE Manual

12
Zoom out
Zoom in
Previous page
1/54
Next page
telescope. Finally, EQ North and EQ South alignments are designed to assist you in aligning the NexStar when polar aligned
using the tripods built-in wedge. Each alignment method is discussed in detail below.
Sky Align
Sky Align is the easiest way to get your NexStar aligned and ready to observe. Even if you do not know a single star in the sky,
the NexStar will have you aligned in minutes by asking for basic information like the date, time and location. Then you simply
need to aim the telescope to any three bright celestial objects in the sky. Since Sky Align requires no knowledge of the night sky
it is not necessary to know the name of the stars at which you are aiming. You may even select a planet or the moon. The NexStar
is then ready to start finding and tracking any of the objects in its object database. Before the telescope is ready to be aligned, it
should be set up in an outside location with all accessories (eyepiece, diagonal and finderscope) attached and lens cover removed.
Also make sure that the tripod is leveled as described in the Assembly section of the manual. To begin Sky Align:
1. Power on the NexStar by flipping the switch located at the base of the fork are to the “on” position.
2. Press ENTER to choose Sky Align. Pressing the ALIGN key will bypass the other alignment options and the scrolling
text and automatically begins Sky Align.
3. The hand control display will then ask for the following time/site information:
Location - The NexStar will display a list of cities to choose from. Choose the city from the database that is closest to your
current observing site. The city you choose will be remembered in the hand controls memory so that it will be
automatically displayed the next time an alignment is done. Alternatively, if you know the exact longitude and
latitude of your observing site, it can be entered directly into the hand control and remembered for future use as
well. To choose a location city:
Use the Up and Down scroll keys to choose between City Database and Custom Site. City Database will allow you to
select the closest city to your observing site from a list of either international or U.S. location. Custom Site allows you
to enter the exact longitude and latitude of your observing site. Select City Database and press ENTER.
The hand control will allow you to choose from either U.S. or international locations. For a listing of U.S. locations by
state and then by city, press ENTER while United States is displayed. For international locations, use the Up or
Down scroll key to select International and press ENTER.
Use the Up and Down Scroll buttons to choose your current state (or country if International locations was selected)
from the alphabetical listing and press ENTER.
Use the Up and Down Scroll buttons to choose the closest city to your location from the displayed list and press
ENTER.
Time - Enter the current time for your area. You can enter either the local time (i.e. 8:00), or you can enter military time
(i.e. 20:00).
Select PM or AM. If military time was entered, the hand control will bypass this step.
Choose between Standard time or Daylight Savings time. Use the Up and Down scroll buttons (10) to toggle between
options.
Select the time zone that you are observing from. Again, use the Up and Down buttons (10) to scroll through the
choices. For time zone information, refer to the Time Zone map in the appendix of this manual.
Date - Enter the month, day and year of your observing session. The display will read: mm/dd/yy.
-If the wrong information has been input into the hand control, the UNDO button will act as a backspace allowing
the user to re-enter information.
Helpful
Hints
-The next time that your NexStar is aligned, the hand control will automatically display the last location (either a
city or longitude/latitude) that was entered. Press ENTER to accept these parameters if they still apply. Pressing the
UNDO button will allow you to go back and select a new city location or longitude/latitude.
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron NexStar 5SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron NexStar 5SE in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info