667030

Celestron CPC Deluxe 800 HD - 11007 Manual

28
Zoom out
Zoom in
Previous page
1/50
Next page
26
>> www.celestron.com
>>
This form of celestial photography is designed for objects with small
angular sizes, primarily the Moon and planets. Planets, although
physically quite large, appear small in angular size because of their
great distances. Moderate to high magnication is, therefore, required
to make the image large enough to see any detail. Unfortunately,
the camera/telescope combination alone does not provide enough
magnication to produce a usable image size on lm. In order to get the
image large enough, you must attach your camera to the telescope with
the eyepiece in place. To do so, you need two additional accessories; a
deluxe tele-extender (#93643), which attaches to the visual back and a
T-ring for your particular camera make (i.e., Minolta, Nikon, Pentax, etc.).
Because of the high magnications during eyepiece projection, the eld
of view is quite small which makes it dicult to nd and center objects.
To make the job a little easier, align the nder as accurately as possible.
This allows you to get the object in the telescope’s eld based on the
nder’s view alone.



Another problem introduced by the high magnication is vibration.
Simply tripping the shutter – even with a cable release – produces enough
vibration to smear the image. To get around this, use the camera’s self-
timer if the exposure time is less than one second – a common occurrence
when photographing the Moon. For exposures over one second, use the
“hat trick.” This technique incorporates a hand-held black card placed
over the aperture of the telescope to act as a shutter. The card prevents
light from entering the telescope while the shutter is released. Once
the shutter has been released and the vibration has diminished (a few
seconds), move the black card out of the way to expose the lm. After
the exposure is complete, place the card over the front of the telescope
and close the shutter. Advance the lm and you’re ready for your next
shot. Keep in mind that the card should be held a few inches in front of
the telescope, and not touching it. It is easier if you use two people for
this process; one to release the camera shutter and one to hold the card.
Here’s the process for making the exposure.
1. Find and center the desired target in the viewnder of your camera.
2. Turn the focus knob until the image is as sharp as possible.
3. Place the black card over the front of the telescope.
4. Release the shutter using a cable release.
5. Wait for the vibration caused by releasing the shutter to diminish.
Also, wait for a moment of good seeing.
6. Remove the black card from in front of the telescope for the duration
of the exposure (see accompanying table).
7. Replace the black card over the front of the telescope.
8. Close the camera’s shutter.
Advance the lm and you are ready for your next exposure. Don’t forget
to take photos of varying duration and keep accurate records of what you
have done. Record the date, telescope, exposure duration, eyepiece,
f/ratio, lm and some comments on the seeing conditions.
The following table lists exposures for eyepiece projection with a 10 mm
eyepiece. All exposure times are listed in seconds or fractions of
a second.


Planet ISO 50 ISO 100 ISO 200 ISO 400
Moon 4 2 1 1/2
Mercury 16 8 4 2
Venus 1/2 1/4 1/8 1/15
Mars 16 8 4 2
Jupiter 8 4 2 1
Saturn 16 8 4 2
The exposure times listed here should be used as a starting point. Always
make exposures that are longer and shorter than the recommended
time. Also, take a few photos at each shutter speed. This will ensure that
you get a good photo. It is not uncommon to go through an entire roll of
36 exposures and have only one good shot.
NOTE: Don’t expect to record more detail than you can see
visually in the eyepiece at the time you are photographing.
Once you have mastered the technique, experiment with dierent lms,
dierent focal length eyepieces and even dierent lters.
>>
This is the last form of celestial photography to be attempted after
others have been mastered. It is intended primarily for deep sky objects
that are objects outside our solar system which includes star clusters,
nebulae and galaxies. While it may seem that high magnication is
required for these objects, just the opposite is true. Most of these objects
cover large angular areas and t nicely into the prime focus eld of your
telescope. The brightness of these objects, however, requires long
exposure times and, as a result, are rather dicult to photograph.
There are several techniques for this type of photography, and the
one chosen will determine the standard accessories needed. The best
method for long exposure deep sky astrophotography is with an o-axis
guider. This device allows you to photograph and guide through the
telescope simultaneously. Celestron oers a very special and advanced
o-axis guider, called the Radial Guider (#94176). In addition, you will
need a T-Ring to attach your camera to the Radial Guider.
Other equipment needs include a guiding eyepiece. Unlike other
forms of astrophotography which allows for fairly loose guiding, prime
focus requires meticulous guiding for long periods. To accomplish this
you need a guiding ocular with an illuminated reticle to monitor your
guide star. For this purpose, Celestron oers the Micro Guide Eyepiece
(#94171). Here is a brief summary of the technique.
1. Polar align the telescope using an optional equatorial wedge. To polar
align the CPC you must select EQ North Align (or EO South Align)
from the alignment options. For more information on polar aligning,
see the Polar Alignment section earlier in the manual.
2. Remove all visual accessories.
3. Thread the Radial Guider onto your telescope.
4. Thread the T-Ring onto the Radial Guider.
T-Ring
Tele-Extender
Eyepiece
Visual Back
35 mm SLR
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron CPC Deluxe 800 HD - 11007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron CPC Deluxe 800 HD - 11007 in the language / languages: English as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info