667034
10
Zoom out
Zoom in
Previous page
1/140
Next page
10 | ENGLISH
Precise Polar Alignment
Celestron’s All-Star Polar Alignment allows you to precisely
polar align your mount without using Polaris or a polar axis
finder. This software-assisted polar alignment allows you to
choose a convenient star.
Prerequisite: The CGX-L must first be aligned with a
Two Star, One Star, or Solar System Align.
1. Select a suitable bright star from the NexStar hand
control’s database. Slew the telescope to the star.
2. Press the ALIGN button. Select “Polar Align” then
Align Mount” from the list.
3. The telescope will then re-slew to the alignment star
and ask you to center it in the eyepiece in order to
“sync” on the star. Press ENTER, center the star with
the arrow keys, then press ALIGN to sync on the star.
4. Press ENTER and the telescope will slew to the
position that the star should be if it were accurately
polar-aligned. At this point, do not use the hand
control to center the star.
5. Use the mount’s altitude and azimuth adjustments
to center the star in the eyepiece.
6. Press the ALIGN button.
The mount is now precisely polar aligned. You may
proceed to use the mount without a new go to alignment.
Motion Range in Mount
Sofware Range
The CGX-L employs software controlled limit sensors which
detect when the mount has nearly reached its mechanical
range limit. Once the mount reaches the sensor, the motor
will decelerate to a stop and a “Limit Switch” warning
message will appear. The mount will no longer slew in the
direction of the limit switch until you reverse directions.
Mechanical Range
The CGX-L uses internal cabling so the mount is designed
not to move more than a certain range. Both axes are
limited by a hard stop built into the mount. This limited
range can also help prevent unintentional interference
between your telescope and the mount or tripod. If for any
reason the mount exceeds the software limit switch (or if
the clutch is unlocked and the mount is manually moved),
the mount will halt at the hard stop.
R.A. limit (Figure 9.1) allows you to track 20º past the
meridian. If you leave the mount unattended while it’s
tracking, it will automatically stop before reaching the
mechanical hard stop. Dec limit (Figure 9.2) contains
enough slew range to reach any portion of the sky.
Figure 9.1 One side of R.A. mechanical limit
Figure 9.2 One side of DEC mechanical limit
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron CGX-L EQUATORIAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron CGX-L EQUATORIAL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info