667041
6
Zoom out
Zoom in
Previous page
1/72
Next page
6
This section covers the assembly instructions for your Celestron Telescope. Your telescope should be set up indoor the first
time so that it is easy to identify the various parts and familiarize yourself with the correct assembly procedure before
attempting it outdoor.
#11086
#11087
#11088
#11089
CGE Pro 925 CGE Pro 1100 CGE Pro 1400 CGE Pro 1400
Fastar
Diameter
235mm (9.25") Schmidt-
Cassegrain
280mm (11") Schmidt-
Cassegrain
356mm (14") Schmidt-
Cassegrain
356mm (14") Schmidt-
Cassegrain
Focal Length
2350mm F/10 2800mm F/10 3910mm F/11 3910mm F/11
Eyepiece
25mm - 1.25" (94x) 40mm - 1.25" (70x) 40mm - 1.25" (70x) 40mm - 1.25" (70x)
Finderscope
6x30 9x50 9x50 9x50
Diagonal
90° - 1.25" 90° - 1.25" 90° - 2" w/1.25" adapter 90° - 2" w/1.25" adapter
Fastar Compat.
No No No Yes
Mount
CGE Pro Equatorial
CGE Pro Equatorial
CGE Pro Equatorial CGE Pro Equatorial
Tripod
2.75" Stainless Steel
2.75" Stainless Steel
2.75" Stainless Steel 2.75" Stainless Steel
Software
NexRemote Telescope
Control Software
NexRemote Telescope
Control Software
NexRemote Telescope
Control Software
NexRemote Telescope
Control Software
Counterweights
1-22lb 2-22lb 3-22lb 3-22lb
The Celestron CGE Pro Series telescopes are shipped in three main boxes plus counterweights. In separate boxes are the
following:
Optical Tube Assembly and Standard Accessories
Equatorial Mount with Hand Control, and Counterweight Bar
Tripod
Additional Counterweights
Remove all the pieces from their respective boxes and place on a flat, clear work area. A large floor space is ideal. When
setting up your Celestron telescope you must start with the tripod and work up from there. These instructions are laid out in
the order each task must be performed.
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
T
T
r
r
i
i
p
p
o
o
d
d
The CGE Pro tripod comes with an all metal center leg brace / accessory
tray to give rock solid support to the mount.
The tripod comes fully assembled with a metal plate, called the tripod head
that holds the legs together at the top. In addition, there is a central rod that
extends down from the tripod head that attaches the accessory tray between
the legs. To set up the tripod:
1. Stand the tripod upright and pull the tripod legs apart until each leg is
fully extended. The tripod will now stand by itself. Once the tripod is
set up, you can adjust the height at which it stands.
2. Loosen the lever on the leg clamp so that the tripod leg can be
adjusted.
Figure 2-1
Leg Clamp
Lock Levers
Accessory
Tray / Leg
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron CGE Pro 1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron CGE Pro 1100 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info