580481
28
Zoom out
Zoom in
Previous page
1/31
Next page
28
With Polaris or a bright star centered within the field of view, focus with either the standard ocular or your highest
power ocular, i.e. the shortest focal length in mm, such as a 6mm or 4mm. Another option is to use a longer focal
length ocular with a Barlow lens. When a star is in focus it should look like a sharp pinpoint of light. If, when
focusing on the star, it is irregular in shape or appears to have a flare of light at its edge, this means your mirrors aren’t
in alignment. If you notice the appearance of a flare of light from the star that remains stable in location, just as you
go in and out of exact focus, then re-collimation will help sharpen the image.
When satisfied with the collimation, tighten the small locking screws
Take note of the direction the light appears to flare. For example, if it appears to flare toward the three o'clock
position in the field of view, then you must move whichever screw or combination of collimation screws
necessary to move the star’s image toward the direction of the flaring. In this example, you would want to move
the image of the star in your eyepiece, by adjusting the collimation screws, toward the three o'clock position in the
field of view. It may only be necessary to adjust a screw enough to move the star’s image from the center of the
field of view to about halfway, or less, toward the field's edge (when using a high power ocular).
Collimation adjustments are best made while viewing the star's position in the
field of view and turning the adjustment screws simultaneously. This way, you
can see exactly which way the movement occurs. It may be helpful to have two
people working together: one viewing and instructing which screws to turn and
by how much, and the other performing the adjustments.
IMPORTANT: After making the first, or each adjustment, it is necessary to re-
aim the telescope tube to re-center the star again in the center of the field of
view. The star image can then be judged for symmetry by going just inside and
outside of exact focus and noting the star's pattern. Improvement should be seen if
the proper adjustments are made. Since three screws are present, it may be
necessary to move at least two to achieve the necessary mirror movement.
Figure 7-2
Even though the star pattern appears the same on both sides of focus, they are asymmetric. The
dark obstruction is skewed off to the left side of the diffraction pattern indicating poor
collimation.
Figure 7-3
A collimated
telescope should
appear as a
symmetrical ring
pattern similar to the
diffraction disk seen
here.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron AstroMaster 114 EQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron AstroMaster 114 EQ in the language / languages: English as an attachment in your email.

The manual is 11,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Celestron AstroMaster 114 EQ

Celestron AstroMaster 114 EQ User Manual - German - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info