Manual Celestron 47011 (page 2 of 15) (English, German, French, Italian, Spanish)

791742

Zoom out

Zoom in

1/15

If these batteries need replacing, remove the small screw on the rear of the Receiver which houses the

batteries (center area of image on right above).

Settings and Operation of the Receiver

y Synchronize Remote Sensor – Press and

hold the “Channel/Snooze” button on the

Receiver and you will hear a beep when

the unit is searching for the remote.

y Indoor & Outdoor Temperature & Humidity – can be displayed on the

Receiver. Press the “Channel/Snooze” button on top of the Receiver to

switch from “Indoor” data to “Outdoor” data (Channel 1). You can also

have the indoor & outdoor information automatically switch about every

four seconds when you push the “Channel/Snooze” button where you see

an icon than means in “switch” mode. Colorful bar graphs (red for

temperature and blue for humidity) change as the information changes.

y Data displayed in “C” or “F” – on the rear of the Receiver you will see a

button and you can push it to change from “C” (Centigrade) or “F”

(Fahrenheit) for the display you desire.

y Clock & Calendar – Press “CLOCK” on the rear of the Receiver and

hold down for a couple of seconds to enter the setup mode. Use the “Up”

or “Down” buttons to make changes. Press the “CLOCK” after each setting is correct. The

settings in sequence will be – 12 or 24 hour format/hour/minute/year/day & month or month &

day format/ month/date/weather forecast icon/exit. Then by pressing the clock you can switch

between the time/month & day/day of week in English language.

y Moon Phase – will automatically be seen near the center of the display.

y Heat Index – combines the effects of temperature and

humidity and is the apparent temperature of how hot the

heat/humidity combination makes it feel. You push the button

on the rear of the Receiver labeled “Heat Index/Dew Point” to

see the data indoors or outdoors (by switching the

“Channel/Snooze” button or by having the indoor & outdoor

information automatically in switching mode.

y Dew Point – is the saturation point of the air, or the

temperature to which the air has to be cooled in order to get

condensation. Push the “Heat Index/Dew Point” button to obtain the information the same way

as noted above under “Heat Index”.

y Memory of Maximum/Minimum Data – you obtain the maximum and minimum of the indoor

and outdoor temperature/humidity/heat index/dew point by pushing the “MEM” button on the

rear of the Receiver. To clear the memory readings, press and hold the “MEM” button for a few

seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47011 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Celestron 47011 Manual

Product: