Manual Celestron 47007 (page 2 of 3) (English)

791747

Zoom out

Zoom in

1/3

Indoor and Outdoor Temperature and Humidity –

the indoor temperature and humidity as well as the

outdoor temperature and humidity is shown on the

LCD display.

Data displayed in “C” or “F” – push the “DOWN”

arrow button (when in a normal mode) to change

from “C” (Centigrade) or “F” (Fahrenheit) for the

display you desire.

Clock and Calendar – Press the “MODE” button

and hold down for a few seconds to enter the setup

mode. Use the “+” or “-” buttons to make changes.

Press the “MODE” after each setting is correct.

The settings in sequence will be – hour / minute /

seconds / year / month / day / time zone / weekday

language / exit. The weekday language to choose

is available in English, German, French, Spanish,

Italian, Dutch, and Danish.

The clock format can be 12 or 24 hour mode – use

the “+” button (in normal mode) to change the

format that you wish to use. The time zone is for

setting normal time to a ± 12 hour difference.

Temperature Alert – you can set a range of indoor

and outdoor temperature alerts (high and low). In

normal mode press the “ALERT” button once, and

it will display an icon that the alert is enabled (to

the left of the indoor and outdoor temperature)

and press again, and the icon will be removed to

indicate the alert is disabled. To set the maximum

and minimum temperatures for the alert, hold

the “ALERT” button down for a few seconds and

an icon (top part) will ﬂash to tell you to set the

maximum temperature alert – use the “UP” and

“DOWN” arrow buttons to choose your alert indoor

temperature and push the “ALERT” button to set.

Push the button again, and the lower icon will ﬂash,

and you will set the minimum indoor temperature

alert. Repeat the same setup again, but when the

top icon is ﬂashing with no temperature displayed,

push the UP arrow button to make the settings for

the outdoor temperature. When the temperature

reaches the alarm stage, the icons will ﬂash and

make a sound.

Alarm Setting – push the “MODE” button to enter

the alarm mode. Press and hold the “MODE” button

a few seconds and set the hour and minute of the

alarm using the “+” and “-“buttons and conﬁrm

the data by pressing the “MODE” button. Press

“MODE” to show the alarm time and the “AL” icon

will be displayed brieﬂy. Press the “AL” to have a

bell appear (in the clock display area), meaning the

alarm is enabled. To turn the alarm off (disable),

press “AL” again, and the bell icon will disappear. To

stop the alarm, press the “+” or

“-” or “AL”.

Channel – if your Sensor is set correctly to Channel

1, you will have the LCD display for the outdoor

temperature and humidity. If you do not have an

outdoor temperature and humidity display, push and

hold the “SEARCH” button until you hear a beep,

and the display should show up in a few seconds.

Placement – the Receiver can be placed on a table,

desk, or other ﬂat surface, or it can (by using a

hanger cut out on the rear of the Receiver) be hung

on a wall or other location.

Reset – if for some reason the LCD display does not

function properly and you are using new batteries,

use a pin (or other very small object) to press the

“RESET” button on the rear of the Receiver.

settings anD oPeration oF the reCeiver

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47007 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Celestron 47007

Celestron 47007 User Manual - German - 3 pages

Celestron 47007 User Manual - French - 3 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Celestron 47007 Manual

Product: