Manual Celestron 47003 (page 3 of 15) (English, German, French, Italian, Spanish)

791748

Zoom out

Zoom in

1/15

y Temperature Alert – hold the “ALERT” button down for a couple of seconds to enter the setup

mode and temperature digits will flash. Press “+” or “-” button to select the indoor temperature

or outdoor sensor temperature and then press “ALERT” to confirm the setting. Press the “=” or

“-” button to set the upper and lower limits (icons will flash) of the temperature and then press

“ALERT” to confirm each setting. Press the “ALERT” button to turn the alert function on or off

(you will see the icons or not).

y Alarm Setting – Press “MODE” button twice to enter the setting mode and then press and hold

down for the “MODE” button to set the alarm time. Enter the desired hour and minute values by

pressing the “+” and “-“button and pressing “MODE” to set each. Press “MODE” button twice

to show the alarm time and the “ALM.” icon will be displayed briefly. Press the “ALARM

ON/OFF” button to have an icon appear (above the seconds display) meaning that the alarm is

enabled. To turn the alarm off (disable) press “ALARM ON/OFF” button again and the alarm

icon will disappear.

y Snooze – when the alarm goes off, press the “SNOOZE” button to go into snooze mode and the

alarm will go off again after 5 minutes. To stop the snooze, press any button.

y Channel – if your Sensor is set correctly to Channel 1, then a small icon to the left of outdoor

temperature display will show a “1” in a box. If you do not have an outdoor temperature and

humidity display, make sure that the “1” is displayed and if not (shows a 2 or 3), then push the

“CHANNEL” button until it shows the “1”.

y Placement – the Receiver can be put on a table, desk, or other flat surface or it can (by using a

hanger cut out on the rear of the Receiver) be hung on a wall or other location. If hanging on a

flat surface, remove the base prior to hanging.

y Reset – if for some reason the LCD display does not function properly and you are using new

batteries, use a pin (or other very small object) to press the “RESET” button on the rear of the

Receiver.

Specifications:

y Indoor Temperature Range = 0º to +50º C (+ 32º to + 122º F)

y Remote Sensor Temperature Range = -50º to + 70º C ( -58º to + 158º F)

y Indoor Humidity Range = 30% to 90% Relative Humidity

y Resolution = ± .5º C (± 1.5º F) for temperature & ± 1.5% humidity

y Clock = digital quartz

y Transmission = RF433 MHz

y Dimensions = Receiver – 3.8” x 2.5” x 6.7” (97mmx64mmx170mm) Sensor - 2.5” x 1.2” x 3.6”

(63mmx30mmx91mm)

y Weight = Receiver - 8oz ( 227g) Sensor - 5oz (142g)

2835 Columbia St.

Torrance, California 90503 U.S.A.

www.celestron.com

Printed in China 0110 RoHS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47003 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Celestron 47003 Manual

Product: