791758
4
Zoom out
Zoom in
Previous page
1/40
Next page
www.celestron.com
4
SETTING UP AMOEBA
1. Carefully remove the microscope tube
(module) and base with stand (silver part)
from box and set on a table, desk or other
flat surface.
2. Carefully slide the microscope tube into
the arms of the microscope base and stand
until the wide section around the power
ring rests against the arms.
3. The metal terminals at the back of the
microscope tube should make contact with
the terminals at the back of the arm (on
base). These terminals supply power from
the computer’s USB port to the microscope
base for the bottom illuminator.
USING AMOEBA FOR VIEWING
AND/OR IMAGING
Before using Amoeba for viewing or imaging
on your computer screen, ensure the driver is
recognized by your computer. Amoeba utilizes
a “Plug and Play” system where the computer
should automatically recognize the driver type on
Microsoft Windows 7, XP, Vista and some 2000
operating systems as well as most Apple MAC
versions 10.4.9 and later operating systems.
USB Cable Socket
Plug the USB cable (larger socket end) into a
USB port on your computer and plug the small
socket of the USB cable into the microscope
tube. Each computer system will have slightly
different messages. For example, on some
Windows operating systems, a message may read
“Installing Device Driver Software” and shortly
thereafter you may see a message “Your Devices
Are Ready to Use.” Follow the instructions shown
on the screen.
You will need to install ULead Photo Management
Software (on Windows operating systems) to
actually view and/or image. All imaging should
be done with the software program as the photo
button on the microscope is not usable. Prior
to installing the software, unplug the USB cable
until the installation is complete. You can also use
some different image/photo capture software that
you may have on your Windows operating system
(Amcap, etc.) if you desire.
1. Microscope Tube and Base 2. Microscope Base Arms 3. Terminals on the Back
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 44326 - Amoeba at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 44326 - Amoeba in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info