Manual Celestron 44325 - Amoeba (page 6 of 40) (English, German, French, Italian, Spanish)

791757

Zoom out

Zoom in

1/40

www.celestron.com

60x Power

1. Always start with lowest power (10x) by

turning the power ring to the 10x position.

2. For viewing a specimen slide, position the

slide under the stage clips as close to the

centerof the stage as possible. For viewing

a solid object, position the object as close as

possible to the center of the stage.

3. To start the ULead Photo Management

Software program, a green LED will light

up to indicate power is ON. Your specimen

slide or object should appear in the

computer screen’s preview area. If not, click

on Capture/Capture Settings. Turn the

focus knob in either direction until you

get a sharp image. You may have to move

the specimen slide or object to center in

the preview screen. Centering objects will

become easier with practice.

4. Now you can choose a higher power

(60x) or the maximum power (200x) by

rotating the power ring until it clicks into

position. You will need to refocus your

slide or object after changing power.

At high power, your views will be

greatly magniﬁed but somewhat darker

and sometimes more challenging to ﬁnd.

The most enjoyable views are seen at

lower powers which have a wider ﬁeld of

view and display brighter images,

especially with solid objects.

5. Viewing or imaging large solid objects

(over 10 mm thick or those that will not

ﬁt on the stage area) is possible using the

microscope tube by itself (not connected

to the base and stand). With the USB

cable attached, remove the microscope

tube from the base and stand. The top

illuminator is used for this type of

viewing or imaging.

Low power (10x) can be used directly on the

object and up to 10 mm away. Medium power

(60x) can be used on objects 5 mm to 10 mm

away. High power (200x) cannot be used for this

type of viewing or imaging. Remember to refocus

each time you move the microscope.

NOTE: For imaging or during set up when

using some operating systems; you may see

windows or ULead error message such as

“cannot start the capture graph”, “cannot

pre-allocate capture ﬁle space”, “window

color format has changed”,etc. you should

disregard any of these messages and click ok.

IMAGING

On some operating systems you may see error

messages pop up when trying to image and if

so click ok or ignore them. On some operating

systems, the LED lights may turn off when a video

is started but immediately turn the LED’s back on

as the video will be recording.

ILLUMINATION

Illumination is powered by the USB cable plugged

into your computer and microscope tube. The USB

cable also provides power for viewing and imaging

using ULead Photo Management Software.

1. The top illuminator (light shining

down onto solid objects) turns on when

pressing the light button once.

2. The bottom illuminator (light shining up

from the base through specimen slides)

turns on when pressing the light

button twice.

3. Both illuminators (top and bottom) can

be turned on by pressing the light button

(again) for viewing semi-transparent

objects or slides.

4. Press the light button (again) to turn off all

illumination.

Note: When power is on, a white LED will light up

inside the top of the microscope tube which has no

function other than to provide a visual effect.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 44325 - Amoeba in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3.16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Celestron 44325 - Amoeba Manual

Product: