484259

Cefar PRIMO PRO Manual

9
Zoom out
Zoom in
Previous page
1/22
Next page
33
AUTO STIMULATION MODE
To provide a pain relieving effect, the level of stimulation should be perceived as a little bit stronger than
the pain intensity. Since the body initially adapts to the set level of stimulation, it is often required to
adjust the amplitude a couple of times to reach the optimal level of stimulation.
By using the Auto stimulation mode the amplitude is automatically adjusted, and the optimal level is
reached after a few minutes of stimulation.
To use the Auto stimulation mode:
Follow steps 1-4 in the section STEP-BY-STEP USE.
5. START THE AUTO TEST
Press the AUTO button
AUTO
P
AUTO
S
for the left or right channel. “AUTO” starts flashing on the display, and
the amplitude increases gradually.
6. FINISH THE AUTO TEST
Press the AUTO button
AUTO
P
AUTO
S
again when you feel the stimulation at a comfortable level.
If you press AUTO too late, or want to start again for any reason, press the AUTO button again to start over.
7. REPEAT THE AUTO TEST FOR THE OTHER CHANNEL
If you want to use the Auto stimulation mode for both channels, repeat steps 5-6 for the other channel.
8. THE STIMULATION STARTS
The program starts after a few seconds, and the amplitude is automatically adjusted to an optimal level of
stimulation.
Even if you use Auto stimulation mode, you can increase or decrease the amplitude at any time by pressing
the INCREASE or DECREASE buttons
AUTO
P
AUTO
S
until the stimulation feels pleasant. If doing so, the auto-
matic amplitude setting is lost.
TIMER
You have the option to change the timing from “- -“ to 60 minutes. If you choose to stay on “- -“, the stimu-
lation will go on until you stop the stimulation manually. The preset treatment time for Program 1–5 and 7
is set to “- -“ minutes and for Program 6 to 10 minutes, but an integrated timer allows you to set the treat-
ment time yourself.
When setting the timer, use the left side buttons of the stimulator for the left channel and the right side
buttons for the right channel.
To set the timer:
1. Select a program and start the stimulation, see section STEP-BY-STEP USE.
2. Press the PROGRAMMING/CONFIRMATION button
AUTO
P
AUTO
S
on the active channel to initiate the timer
function.
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cefar-primo-pro

Reset search

  • I have a CEFAR Primo No. 2001-23411 unit but have misplaced the instructions for opning the unit to check batteries. Please let me know what to do. Submitted on 7-8-2022 at 16:02

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cefar PRIMO PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cefar PRIMO PRO in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cefar PRIMO PRO

Cefar PRIMO PRO Quick start guide - Dutch - 1 pages

Cefar PRIMO PRO Quick start guide - French - 2 pages

Cefar PRIMO PRO User Manual - Norwegian - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info