753616
15
Zoom out
Zoom in
Previous page
1/57
Next page
ENGLISH ENGLISH
28 29
CONGA ROCKSTAR 500 ULTIMATE ERGOWET CONGA ROCKSTAR 500 ULTIMATE ERGOWET
3. Unscrew the plastic cyclone and remove it too.
4. Pull from the tab located on the top of the handheld vacuum cleaner and remove the
high-efciency lter.
5. Wash all of them with warm water.
6. Allow them to dry completely before installing and using them again.
CEPILLO JALISCO
Recommendation: It is important to clean the brush regularly to avoid hair and other foreign
objects from tangling and to prevent blockages.
1. Press the brush release button on the bottom part of the suction base and remove the
brush.
2. Wash it with warm water, do not use detergents or soap.
3. Make sure it is completely dry before installing it back I the device.
7. WET ACCESSORY
BEFORE USE
1. Take the product out of the box.
2. Remove all packaging materials. Keep the original box.
3. Make sure all the components are included and in good conditions, otherwise, contact
immediately the ofcial Technical Support Service of Cecotec.
4. When you do not use the vacuum cleaner for a long time, please remove the water tank
and empty the remaining water. Do not expose to direct sunlight or damp environments.
MOP INSTALLATION/REMOVAL
Removing/installing the water tank
In order to install/remove the cleaning cloth you must rst
disassemble the water tank from the rest of the appliance.
In order to remove the water tank, use your foot to hold it against the
ground and pull upwards until it unclicks from position.
Once the cloth has been installed and the water tank has been lled,
to reinstall the water tank, simply push it back together until it clicks
into position.
Note: Do not use cleaning agents. Use clean and room temperature water
only. Do not use the vacuum cleaner to vacuum water.
Installing the mop cloth
Place the mop cloth on the ground with the Velcro facing
upwards.
Align the mop cloth with the Velcro strips on the water tank and attach it.
Water emission
When using this product for the rst time, make sure the water
tank lid is not fully open. When not in use, pay attention to this
water emission push button and to the tank lid, as water leak may
occur when the water tank is full and the product is not in use.
To activate water emission, the water emission push button must
be pressed, and to stop water emission, the push button must be released as shown on
the following gure:
Note: If the vacuum cleaner is not going to be used for a long period of time, make sure to
remove the water tank and to empty the remaining water. Do not expose it to direct sunlight
or to damp environments.
Water emission
Water closed
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga Rockstar 500 Ultimate ErgoWet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga Rockstar 500 Ultimate ErgoWet in the language / languages: English, Spanish as an attachment in your email.

The manual is 45,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info