Manual Cecotec Conga 4090 (page 32 of 148) (English, German, Dutch, French, Italian, Portuguese, Spanish)

725501

Zoom out

Zoom in

1/148

ENGLISH

Note:

• Do not use the scrubbing function while the robot is unattended.

• Remove the mop bracket when the robot is charging or not in use.

• If there are carpets in the house, set Restricted Areas to avoid the robot from passing

over them.

• Add some drops of cleaning agent (not corrosive) if considered necessary.

Warning: the excess of cleaning agents might block water outlets.

5. To remove the mop bracket, press the release button and pull from it outward.

Warning: in order to achieve perfect scrubbing, it is suggested to moisten the mop before

using it.

FIRST CLEANING

Once the robot and the charging base are completely installed, follow these steps before

scheduling the rst cleaning cycle.

First of all, the robot must be fully charged. It is suggested to allow the robot to charge

overnight. When it is fully charged, it may carry out the rst cleaning cycle and save the rst

map. To do so, activate Auto cleaning mode and Eco power level. It is very important to follow

these indications for the robot to recognize each and every corner in the house and to create

a complete map.

If the house where the robot is going to be used is too big and the robot runs out of battery, do

not worry. The robot returns to the charging base, saves the full map and those that have not

been completed, and once it is charged again, it resumes the cleaning cycle from the point it has

stopped until it maps 100 % of the surface. The robot keeps on mapping constantly, therefore

it adapts independently to each house’s features and improves previous maps continuously.

5. OPERATION

• Once the robot’s light indicator changes from blinking yellow to steady blue, the battery is

fully charged and the robot is ready to operate.

• The robot cannot operate with low battery.

Recommendation: Remove all cables and obstacles from the oor before operating the robot

in order to avoid accidents and damage.

where can i found a spare parts for my conga4090
lost the ceppilo Submitted on 31-3-2022 at 07:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 4090 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cecotec Conga 4090 Manual

Product: