753589
20
Zoom out
Zoom in
Previous page
1/23
Next page
ENGLISH
36
The robot does not clean
ef ciently or dust leaks
from the robot.
• The dust tank is full. Empty it and clear the high-ef ciency
lter if it is blocked.
• The high-ef ciency lter is blocked, clear it.
• The main brush is tangled with foreign matter, please clear
it up.
The robot could not connect
to Wi-Fi • The Wi-Fi signal is poor. Make sure the Wi-Fi signal is
correct.
• The Wi-Fi connection is unstable. Reset the router, check if
there are any App updates and try again.
The robot did not carry out
the scheduled cleaning • Check if the robot is in Night mode and switch mode. The
robot does not carry out scheduled cleaning cycles under
this mode.
• Make sure the robot is connected to the network, it will not
be able to carry out scheduled cleaning tasks without being
connected.
The robot does not return to
the charging base after spot
cleaning or after changing
starting position.
• The robot will map and calculate a new route after opera-
ting under spot cleaning or after having changed its starting
position.
• If the charging base is very far away from the robot, it will
not be able to charge back automatically. Put the robot back
on the charging base manually.
The robot does not resume
cleaning • Make sure the robot is not in Night mode, it will not resume
cleaning under this mode. It won’t resume cleaning when it
is placed manually on the charging base.
The robot is always of ine • Make sure the robot is successfully connected to the ne-
twork and always in the range covered by the Wi-Fi signal.
Connection between the
mobile phone and the robot
failed
• Make sure the robot and the charging base are in an area
with good Wi-Fi signal, reset the router and try connecting
them again.
10. TECHNICAL SPECIFICATIONS
Model: Conga 3290 Titanium
Reference No.: 05415
100-240 V~50/60 Hz
Battery: 14.8 V, 3200 mAh
Frequency Bands: 2.412-2.472 GHz
Maximum Transmission Power: 16 dBm
Made in China | Designed in Spain
20


Need help? Post your question in this forum.

Forumrules
1

Forum

cecotec-conga-3290

Reset search

  • How to clean the sensors, can the front side be opened? Submitted on 4-8-2022 at 07:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 3290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 3290 in the language / languages: English as an attachment in your email.

The manual is 15,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info