753589

Cecotec Conga 3290 Manual

16
Zoom out
Zoom in
Previous page
1/23
Next page
ENGLISH
32
4. Spiral mode
The robot is placed in a speci c point, it moves towards the outside in a spiral motion and then
returns to the starting point in a spiral motion too. If the robot bumps into an object, it will
nish the cleaning cycle in the opposite direction.
5. Manual mode
The robot can be controlled manually by pressing the direction arrows on the display. While
the arrow is held pressed, the robot will keep on moving. The robot will operate according to
the suction power level and water intensity level selected on the homepage.
6. Twice mode
When this mode is activated, the robot will rst clean in Edge mode, then will carry out an
organized cleaning cycle in zig zag motion, then Edge mode again and another organized
cleaning cycle in zig zag motion. Once it has  nished, it will return to the charging base, or if
it runs out of battery before  nishing, it will recharge and the resume cleaning until  nished.
This mode can only be activated during Edge, Scrubbing, Spiral and Smart Area modes.
7. Scrubbing mode
This robot can also scrub the oor. When this mode is activated, the robot moves in a swaying
motion, simulating real scrubbing moves. It starts off by Edge mode, then carries out an
organized scrubbing cycle in zig zag motion, and nally returns to the charging base taking
the straightest way and memorizing the route. If it runs out of battery before  nishing, it will
recharge and the resume cleaning until nished.
8. Spot cleaning mode
This mode can only be activated with a previously saved map. The user must select a speci c
spot in the map, and the robot will clean a 2 x 2 m area around the selected spot. Once it has
nished cleaning it, it returns smartly to the charging base, taking the straightest way and
memorizing the route. Only one speci c spot can be selected at a time.
… 16 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cecotec-conga-3290

Reset search

  • How to clean the sensors, can the front side be opened? Submitted on 4-8-2022 at 07:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 3290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 3290 in the language / languages: English as an attachment in your email.

The manual is 15,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info