753599
45
Zoom out
Zoom in
Previous page
1/136
Next page
45
ENGLISH
The robot cannot be activated Make sure the main power switch is in the ON
position.
Make sure the battery is fully charged.
Replace the batteries (2 AAA) in the remote
control.
Make sure the remote control is within the
robot’s range (16 ft/5 m).
If the problem persists, turn the main power
switch off and restart it.
The remote control does not work Replace the batteries in the remote control.
Make sure the robot is turned on and fully
charged.
The robot stops operating suddenly Check if robot is trapped or stuck on an
obstacle.
Check if the battery level is too low.
If the problem persists, turn the main power
switch off, wait for 2 seconds and restart it.
The schedule function does not work Make sure the main power switch on the
bottom of robot is turned on.
Make sure the time, time of day (AM/PM), and
the scheduled time have
been set correctly.
Check if robot’s battery is too low to start
cleaning.
Weak suction power Check if any obstructions are blocking the
suction inlet.
Empty the dust tank.
Clean the lters with a vacuum cleaner or a
cleaning brush.
Check if the lters are wet.
Air-dry the lters completely before use.
The robot does not charge Check if the indicator on the charging base
are lighted up. If not, contact the Technical
Support Service of Cecotec.
Clean the charging terminals with a dry cloth.
Check if the robot beeps when it gets to the
charging base. If not, contact the Technical
Support Service of Cecotec.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 1790 Ultra at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1790 Ultra in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info