753599

Cecotec Conga 1790 Ultra Manual

42
Zoom out
Zoom in
Previous page
1/136
Next page
42
ENGLISH
Press the dust tank’s release button.
Fig. 39
Open the dust tank and empty it.
Fig. 40
Cleaning of the robot’s lter
Remove the lter.
Carefully shake off all dust from the lter.
Fig. 41
Cleaning of the free-fall sensors
Use a clean, dry and soft cloth to wipe off any dust from the free-fall sensor located on the
right side of the robot’s bottom part.
Warning: Do not spray cleaning products directly on the sensor.
Fig. 42
Cleaning of the main brush
Slightly press the main brush frame’s tabs in order to open the main brush storage gap and to
remove it.
Fig. 43
Remove any hair, uffs or dust collected in the brush and around the axes.
Fig. 44
Clear and clean the robot’s suction channel.
Fig. 45
Reinstall the main brush and its frame.
Fig. 46
High-efciency lter
The high-efciency lter is designed with bres that help trapping dust particles, dust mites,
pollen... It is very important to clean periodically the lter, to avoid these particles from building
up in the lter, causing efciency loss. It is convenient to carry out this maintenance once a
week.
It is suggested to replace the lter by a new one after a maximum of 160 hours of use.
Recommendations: Dirt can be removed with a small brush or by shaking it carefully against a
hard surface for dust to fall off. The high-efciency lter cannot be washed.
Mesh primary lter and sponge lter
The ltering system is featured with a mesh primary lter and a sponge lter. It is suggested
to replace them either after a maximum of 160 hours of use or when they are worn out due to
operation.
Recommendations: Dirt can be removed with a small brush or by shaking it carefully against
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 1790 Ultra at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1790 Ultra in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info