753597
31
Zoom out
Zoom in
Previous page
1/71
Next page
ENGLISH
32
if necessary until it nishes it. Once it has completed cleaning, the robot will operate in
Random mode until it runs out of battery.
2. Edge mode: the display will show MODE 1, the robot will clean along the edges and will
return to the charging base through its smart technology once it has nished. If there is
no charging base, the robot will return to the starting point.
3. Area mode: the display will show MODE 2 and the robot will clean a 2*2 m area.
4. Random mode: the display will show MODE 3, will start cleaning randomly and then will
return to the charging base with its smart technology once it runs out of battery. The
robot will not create any map under this mode.
5. Twice mode: the display will show MODE 4, the robot will carry out a whole cleaning cycle
following the next pattern: Gyro mode, Edge mode, Gyro mode and Edge mode again.
When the cycle is completed, it will return to the charging base with its smart technology.
6. Scrubbing mode: Press the button to enter the water-intensity mode and select
the desired intensity and select between 1, 2 or 3 (see WATER INTENSITY/TIME SETTINGS
section). The display will show MODE 6. With this mode, the robot will carry out a cleaning
cycle in Gyro mode and in Edge mode, moving forward 2 metres and then backwards 1
metre consecutively, simulating a real scrubbing movement. It will return to the charging
base if necessary to nish cleaning, and nally will return to the charging base when it
runs out of battery. You can select the desired water intensity level: high, medium or low.
Do not use the mop outdoors.
Remove the carpets before operating the robot under this mode.
During operation, control the water level on the Wet&dry tank. If it empties, ll it up
again before continuing scrubbing.
Take the Wet&dry tank and the mop out before charging the robot.
Note: in order to ensure perfect scrubbing, moisten the mop before starting scrubbing.
7. Gyro mode: When this mode is activated, the robot
willcarry out a whole cleaning cycle in Gyro mode and then
in Edge mode. The display will show MODE 5. Once it has
nished, it will automatically return to the charging base. If it
has not started the cleaning cycle form the charging base, it
will return to the starting point.
Note: If the room being cleaned is smaller than 10 m2, the robot will carry out the same cycle
twice.
8. Manual mode
Use the direction buttons to take the robot to the specic points where you want it
to clean.
9. Back home mode
This mode can be selected at any point of any cleaning cycle. Once it is activated,
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 1590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1590 in the language / languages: English, Spanish as an attachment in your email.

The manual is 17,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info