Manual Cecotec Conga 1490 (page 25 of 112) (English, German, Dutch, French, Italian, Portuguese, Spanish)

753588

Zoom out

Zoom in

1/112

ENGLISH

4. OPERATION

4.1 TOUCH DISPLAY

1. Power button

2. Wi-Fi indicator light

3. Battery indicator light

1. ON/OFF

• Press to start the robot up.

• From the standby mode:

- Press to start auto cleaning mode.

- Hold down from 3 to 5 seconds to enter network conguration.

- Hold down for 7 seconds to enter sleeping mode.

• During operation:

- Press to stop operation.

• During charging:

- Press to enter auto cleaning mode.

2. Wi-Fi indicator light

• When entering network conguration (see before section), the white light will blink

slowly.

• When the device connects to the Wi-Fi, the white light will turn steady.

• If the device fails to connect, the white light will blink faster.

3. Battery indicator light

• The light will turn red when the battery is low.

• The light will switch from blue to red alternately during charging.

• The light will turn steady blue when it is totally charged.

4.2 BATTERY CHARGING

1. Charging base

• Place the charging base against the wall.

• Remove any obstacle from around the charging

base, following the safety distances shown on the

below picture:

• Always turn the robot’s power switch ON before

placing it on the charging base.

2. Connection

• Plug one of the adapter ends into the robot’s charging socket and the other to the

power supply. (Fig. a)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1490 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cecotec Conga 1490 Manual

Product: