725500

Cecotec Conga 1092 Manual

24
Zoom out
Zoom in
Previous page
1/84
Next page
ENGLISH
24
• Before operating the robot under spot cleaning
mode, place it on the spot to be cleaned.
• Press the spot cleaning button on the remote
control.
4. Edge cleaning
Once the robot has finished cleaning your home’s open
areas, it will start cleaning edges, along walls and around
furniture such as table or chair legs. If you want to
activate this mode directly, skipping the previous process,
press the edge cleaning button
on the remote control.
5. Max Power function
Press the button on the remote control in order to
control the robot’s suction power during the cleaning
process. The suction power can be increased or decreased.
Daily cleaning scheduling
In order to make cleaning easier, this robot includes daily schedule settings in order for
you to customize the cleaning cycles from the remote control. The robot will start cleaning
automatically the set days at the set time.
*The time options on the remote control are 12:00 am – 11:59 pm and 12:00 pm – 11:59 pm.
*Before adjusting the robot time and settings, make sure the power switch is set at “I” and that
the robot’s AUTO button is lit up in blue or green. If it does not light up, press the robot’s power
button or turn it on from the remote control.
• Select the current day and time.
• Press the button and the day of the week and the symbol on the display will blink.
First, select the day of the week using the direction arrows and .
• Use the button to switch from fay to week. Then, use the and buttons to select the
desired time. Repeat this step to select minutes.
• Once the day of the week and the time is set, press OK or to save the settings.
IMPORTANT: the day of the week will not appear on the display. In order to check if it has
been properly saved, press again and make sure the day of the week is correct.
Setting cleaning schedule
1. Press the button to enter schedule settings.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 1092 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1092 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 13,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info