787934
16
Zoom out
Zoom in
Previous page
1/21
Next page
14 OPERATING YOUR TABLE BLENDER TB 7010
MANUAL MODE
1. When the default setting appears on
the display, press MODE twice until
the operating mode icon changes into
“manual” and the cooking time icon is lit.
2. Press +/- to set the desired cooking time
and press MODE to con rm.
3. The speed icon will be lit, then press +/-
to set the desired speed. You can set the
speed between 1 to 9 where “1” ´is the
lowest and “9” is the highest speed.
4. Press the main power switch to start the
blender.
NOTE
The display will turn o automatically
when the blending beaker is removed
from the base. When you put the
beaker on the blender, it will light
again.
STOPPING THE BLENDER OPERATION
Press the main power switch while the
blender is in operation. The blender will
stop. If you want to continue processing,
it’snecessary to select the preset program or
cooking time.
ADDING RAW MATERIALS
If you need to add some items during
mixing, carefully remove the measuring cup
by turning counterclockwise and add the
items through the lid hole. Nevertheless, we
recommend to turn the blender completely
o before removing the measuring cup to
prevent food from springing out from the
container.
NOTE
If the food gets stuck around the knife
unit, press the main power switch to
turn the blender o and wait until
the knife unit has come to acomplete
stop. Then, unplug the power cord
from the socket and use aspoon or
aspatula to remove the food. Never
use your  ngers or hands because the
knives are very sharp.
WARNING!
Never blend boiling
or hot foods.
This may lead to
underpressure
creation inside the
beaker, causing the
content to spring
out when opening
the lid. Otherwise,
burns might occur.
Always allow the
food to cool down
to about 45°C. Never
start the blender
without the lid and
the measuring cup
attached.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Catler TB-7010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Catler TB-7010 in the language / languages: English as an attachment in your email.

The manual is 0.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info