508115
18
Zoom out
Zoom in
Previous page
1/21
Next page
ENG-35ENG-34
ENG
60 80 100 120 140 160 180 200
rpm
Cadence
CDC.ZONE
80 - 120 rpm
Cadence zone
Default zone
Target training zone
Alarm
ZONE
Trouble shooting
If a malfunction occurs, check the following before contacting CatEye or your retailer for
repair or service.
Trouble on display
Use of the target zone
When the target cadence zone is turned On, cadence is monitored against set zone range.
When the cadence is out of the zone during measurement, the computer sounds an alarm
and notifies a rider by flashing .
For training aiming at a cadence of 80 to 120 rpm, set the lower limit to 80 and upper limit
to 120.
Then, the computer emits an alarm when the cadence falls below 79 rpm, or rises above
121 rpm.
Once the target zone is set to On, the relevant data are recorded to the file and the time in
zone the time in the zone, time above the zone, and time below the zone and their percent-
ages can be viewed in the file view (page 23).
* You can enter any upper/lower limit to the zone.
* For the target zone, you can change on/off and the upper/lower limit of the target zone
from the menu screen Setting the target cadence zone (page 33).
* On/off of the alarm sound is selected from the menu screen Setting sound (page 32).
Trouble Check Items Remedy
Display motion be-
comes slower.
Flashes on the
screen.
No displays appear.
Meaningless display
appears.
Cannot measure the
trip speed (cadence)
Is the surrounding temperature
low (below zero degree Celsius
or 32 degrees Fahrenheit)?
Temperatures below freezing may re-
sult in slower screen response. Data
is not affected.
The remaining battery ca-
pacity for the computer is
low.
Replace it with a new battery
(CR2032) immediately.
After replacement, be sure to perform
the restarting operation (page 10).
Is the battery for the com-
puter empty?
Replace it with a new battery
(CR2032).
After replacement, be sure to perform
the restarting operation (page 10).
Perform the restarting operation
(page 10).
Have you checked the sensor ID?
Is the computer ID Synch'ed
with somebody else's sensor?
Is the Speed and Cadence
sensor icon on
, ?
Check whether the distance
between the speed (ca-
dence) sensor and the mag-
net is too large.
Is the sensor zone of the
speed (cadence) sensor off
the center of the magnet?
Has the power-saving function
been activated, showing only
date/clock on the screen?
Is the battery for the speed
sensor empty?
Check the speed sensor ID (page 28)
for SP1 (speed sensor 1) or SP2
(speed sensor 2).
If the Speed and Cadence sensor
icon is off
, , the computer can-
not receive data. Press the M1/+ or
M2/- button once to turn on the icon.
Adjust the position of the speed (ca-
dence) sensor and that of the mag-
net correctly. (See How to install the
unit on your bicycle on page 6.)
Press any button on the computer
to cancel the power-saving function.
Replace it with a new battery
(CR2032).
After replacement, be sure to press
the RESET button on the speed
sensor.
Continue
Pressing the LT button
does not turn on a light.
Check whether lights
up on the computer screen.
The remaining battery ca-
pacity for the computer is
low.
Replace it with a new battery
(CR2032).
After replacement, be sure to
perform the restarting operation
(page 10).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye V2c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye V2c in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye V2c

Cateye V2c User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info