508115
9
Zoom out
Zoom in
Previous page
1/21
Next page
ENG-17ENG-16
ENG
1
2
3
4
5
6
M1/+
M1/+
M1/+
SSE
M1/+
SSE
M2/-
LT
SSE
1 Current speed
Displays the current speed.
Updated every second.
2 Cadence
Displays the number of pedal rotations per minute.
Updated every second.
Measurement screen
Upper and middle display data
*1: When the trip distance (DST) exceeds 10,000 km [mile], or the elapsed time (TM)
exceeds 100 hours, [E] appears indicating further measurement is impossible. Clear
the data by resetting (page 16).
*2: This device calculates the average excluding the time when you stop pedaling. This
feature produces actual averages, which are different from those with conventional
models that calculate it for the entire measurement time period.
3 Average speed
*1
Displays the average speed after the start of measurement.
4 Average cadence
*2
Displays the average cadence after the start of measurement.
* The average will not be reflected when you stop pedaling.
5 Maximum speed
Displays the maximum speed after the start of measurement.
Updated independently of starting/stopping measurement.
6 Maximum cadence
Displays the maximum cadence after the start of measurement.
Updated independently of starting/stopping measurement.
Starting/Stopping the measurement
Initially, the unit starts or stops measurement automatically in sync
with the bicycle motion. This is called auto-mode function.
km/h or mph flashes during measurement.
The total distance, maximum speed, and maximum cadence are up-
dated independently of stating/stopping measurement.
Auto-mode function
When the auto-mode is turned on ( lights up), the unit detects
the wheel spinning, and starts/stops measurement automatically.
When the auto-mode is turned off ( lights off), the unit starts/
stops measurement by using the SSE button.
* For on/off of the auto-mode, see the menu screen Setting the auto-
mode (page 31).
* When the transmission is stopped and Sensor signal icons
,
are off (page 14), the main timer may not start due to speed signal
not responding.
Press the M1/+ or M2/- button to turn on the sensor signal icons
, .
Backlight
Pressing the LT button illuminates the displays for about 3 seconds.
* Pressing any button while backlight is still on extends the illumination
for another 3 seconds.
Resetting the measurement data
To reset the measurement data (TM, DST, Lap Time, C.D. DST, etc)
and the lap data, simultaneously press the SSE button and the
M1/+ or M2/- button in the measurement screen.
* Resetting the measurement data saves the data automatically on a
file. (page 23)
* The screen will freeze for about 2 seconds after resetting; however,
all measurements are operating normally, including the elapsed time.
* The countdown setting (C.D.DST) is returned to the manu set
value you set.
* Cannot reset for 5 seconds after pressing the LAP button.
Power-saving function
When the computer does not receive any data for 5 minutes, it will
enter the power-saving mode, in which only the date/clock is displayed.
By pressing any buttons except the AC recovers from the power-
saving mode, and the measurement screen appears. You must press
a button when the computer is in power saving mode before it will
start to measure any data.
Power-saving mode
AT icon
(or)
(Simulta-
neously press)
(Simulta-
neously press)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye V2c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye V2c in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye V2c

Cateye V2c User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info