473083
7
Zoom out
Zoom in
Previous page
1/79
Next page
ENG-6
2.4 GHz digital wireless system
2.4 GHz-frequency digital wireless technology, which is the same technology used for wireless LAN,
is used for both the integrated speed/cadence sensor and the heart rate sensor. This technology
practically eliminates interference from external noise and cross-talk with other wireless computer
users, and enables you to store highly reliable data. However, in a very rare occasions, objects and
places may generate strong electromagnetic waves and interference, which may result in incorrect
measurement. The following are potential sources of interference:
Should be especially careful while synchronizing the sensor ID.*
TV, PC, radios, motors/engines, or in cars and trains.•
Railroad crossings and near railway tracks, around television transmitting stations and radar bases.•
Other wireless computers or digitally controlled lights.•
Automatic recognition of the speed sensor ID
The speed sensor has its own ID, and the wristwatch measures in synchronization with the ID. Two
speed sensor IDs can be registered to one wristwatch, which can automatically identify the 2 speed
sensors once their IDs are registered in advance.
As a tire circumference is set to the speed sensor ID, wheel selection by manual operation is no
longer required, which was necessary with conventional units.
The speed sensor currently recognized is indicated with a sensor icon (* or ) on the screen.
Procedure of automatic recognition
When the wristwatch changes to the Clock mode by its power-saving function, and then returns to the Sports
mode, automatic recognition of the speed sensor ID is performed through the following procedure.
The wristwatch searches a sensor signal from the speed sensor ID-1.
1.
When the wristwatch receives a sensor signal from ID-1, it displays sensor icon
2.
on the
screen, and starts measurement.
When the wristwatch cannot receive any sensor signal from ID-1, it searches a sensor signal
from ID-2.
When the wristwatch receives a sensor signal from ID-2, it displays sensor icon
3.
on the
screen, and starts measurement.
When the wristwatch cannot receive any sensor signal from ID-2, it searches a sensor signal
from ID-1 again.
The wristwatch repeats synchronization through the procedure described above even if it fails in
synchronization for some reason, such as communication failure; in such cases however, it takes
time for recognition.
When the wristwatch cannot receive any signal from the speed sensor in 5 minutes, the *
power-saving mode is activated, and the wristwatch changes to the Clock mode.
Switching the ID by manual operation
The speed sensor ID can be forcibly switched by manual operation from “Setting the tire circumfer-
ence” in the Setup mode. Use this operation in the following cases.
When the wristwatch cannot recognize the intended sensor signal, since the 2 registered speed •
sensors are nearby and both are sending a sensor signal.
When you want to switch the speed sensor ID immediately.•
Once you switch the speed sensor ID by manual operation, the wristwatch continues to search *
only the speed sensor ID you switched when returning to the Sports mode. When the wristwatch
cannot receive any sensor signal in 5 minutes, the power-saving mode is activated, and the
wristwatch changes to the Clock mode. The wristwatch searches through the procedure of
automatic recognition when it returns to the Sports mode.
Important
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye MSC-CY200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye MSC-CY200 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye MSC-CY200

Cateye MSC-CY200 User Manual - German - 79 pages

Cateye MSC-CY200 User Manual - Dutch - 79 pages

Cateye MSC-CY200 User Manual - French - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info