508119
45
Zoom out
Zoom in
Previous page
1/51
Next page
ENG-44
Trouble on operation
Trouble Check Items Remedy
Pressing the LT but-
ton does not turn on
a light.
Check whether
lights up
on the computer screen.
The remaining battery capac-
ity for the computer is low.
Replace it with a new battery
(CR2032).
After replacement, be sure to per-
form the restarting operation (page
11).
No measurement
starts even while
riding.
Check if the auto-mode is off
(
is turned off).
When the auto-mode is off (
is
turned off), press the relevant but-
ton to start/stop the measurement.
For automatic measurement, turn
on the auto-mode (page 35).
The heart rate sensor
(speed sensor) ID
check failed.
The battery for the heart rate sensor
(speed sensor) is possibly depleted.
After replacing the battery with a
new one (CR2032), check the sen-
sor ID again (page 32).
Lap data cannot be
stored.
Have you already completed
99 laps?
Delete data files that contain several
laps from the file view (page 29)
in order to obtain free space for lap
recording.
Is the lap time over 100 hours
(Or is the trip lap distance
over 9999.99 km)?
With the recording range exceeded,
the lap cannot be measured.
Perform the resetting operation
(page 19) for further measure-
ments.
Is it immediately after press-
ing the LAP button?
You cannot record the lap for 5
seconds immediately after pressing
the LAP button.
Abnormal values
appear.
Are there any objects emit-
ting electromagnetic waves
(railway tracks, transmitting
stations for television, Wi-Fi
environment, etc.) nearby?
Keep the unit away from any object
that may be causing interference,
and perform the resetting operation
(page 19).
In menu mode, can-
not change settings.
Is it currently measurement? Only top menu can be viewed during
measurement.
When the auto-mode is turned
on (with
illuminating), it may
enter the measurement mode
due to electromagnetic waves.
Keep the unit away from any object
that may be causing interference
with electromagnetic waves.
Check whether “DATA RESET
is displayed on the screen.
To change the HR target zone, the
resetting operation is required.
Stop the measurement, and perform
the resetting operation (page 19).
Measurement data
cannot be stored on
the file view.
Has the total number of laps
reached 99?
Delete data files that contain several laps
from the file view (page 29) in order
to obtain free space for lap recording.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-TR210DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-TR210DW in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-TR210DW

Cateye CC-TR210DW User Manual - German - 51 pages

Cateye CC-TR210DW User Manual - Dutch - 51 pages

Cateye CC-TR210DW User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info